Product Description
The ZAZQ and ZAZX electric three-way merging and diverging regulating valves are guided by a cylindrical thin-walled window shaped valve core. Equipped with DKZ linear electric actuator, capable of accepting 0~10 or 4~20mA DC signal drives valve opening and closing. The three-way merging regulating valve is used to mix two fluids into a third fluid or the same fluid at different temperatures into the same temperature fluid. A three-way splitter valve divides a fluid into two streams.
The diameter of this series of products ranges from 25mm to 200mm, with nominal pressures of 1.0, 1.6, 4.0, and 6.4MPa. The temperature range is -60 ℃ to 450 ℃, and the control signal is 0~10 or 4~20mA DC. Different actuators can be divided into two types: ordinary and electronic.

Product Features
The direction of fluid action on the valve core is in the open state, so the working stability is good.
In addition to the liner guidance at the valve cover, the side of the valve core and the inner surface of the valve seat also have a guiding effect, with a large guiding area and reliable operation.
The servo amplifier adopts deep dynamic negative feedback, which can improve the adjustment accuracy.
There are various forms of electric operators that can be applied to 4-20mA DC or 0~10mA DC
Electronic electric control valves can directly control valve opening with current signals without the need for servo amplifiers.
Save automation investment. Compared with single seat, double seat or sleeve regulating valves, the same system can save one valve, simplify the system, and save investment.
The bellows sealing type forms a complete seal for the moving valve stem, preventing fluid leakage.
Part material
Valve body and valve cover: HT200、ZG230~450ZG、1Cr18Ni9Ti
Valve core and seat: 1Cr18Ni9Ti, Stellite alloy overlay welding
Packing: Polytetrafluoroethylene
Push rod and liner: 2Cr13
technical parameter

Main technical parameters

Technical parameters related to supporting electric actuators

Allow pressure difference

Size and weight

Connection standards

Flange standards: Cast iron flanges according to GB4216.5-84, cast iron flanges according to GB9113-88 JB/T79-94
Flange sealing surface type: PN10, PN16 are convex surfaces
PN40 and PN64 are concave and convex surfaces, and the valve body is concave
Structural length: GB12221-89
Jacket insulation type jacket heat carrier interface: butt welding with a diameter of 18 × 4
The distance between the valve body flange and the flange end face can be manufactured according to the standard specified by the user. Standards such as ANSI, JIS, JPI, etc.

Other similar products:ZAZM electric sleeve regulating valve ZAZN electrically regulating valve ZAZP electric (single seat) regulating valve/ZDL series electronic electric straight through regulating valve