details

Product specifications:

1. This incinerator is equipped with a protective device, which can automatically cut off the fuel supply and stop the equipment when the ignition of the burner is abnormal after starting.

2. Before stopping operation, the device detects the cooling program of the combustion chamber, so that when the combustion chamber temperature drops to the set temperature, the incinerator stops running.

3. There are connection protection devices between the control cabinet and various control equipment to prevent leakage. At a relative humidity of 85%, the insulation resistance of the electrical circuit is not less than 24M Ω, and there is a grounding wire to transmit leakage. The power connection is protected by a metal hose outside.

4. This device has been inspected and verified by the technical department before leaving the factory to ensure the normal operation of the customer.

The incoming household waste is not directly sent to the garbage incinerator, but undergoes a storage process. Setting up garbage storage pits, firstly to store incoming garbage and regulate the amount of garbage; The second is to stir, mix, and dehydrate the garbage, which plays a regulating role in the properties of the garbage. In addition, the incoming garbage stays in the storage pit for a certain period of time, and through natural compression and partial fermentation, the moisture content of the garbage can be reduced to increase the calorific value of the incoming garbage and improve the incineration effect of the garbage. The appropriate residence time for household waste in the storage pit is 3-5 days, and for those with low temperature and high humidity, the residence time can be appropriately extended.

As the seasons change, the moisture content, dryness level, and types of garbage vary, the residence time of the grate's reciprocating motion is adjusted. Usually, during the rainy season and low temperatures, the residence time of the grate needs to be appropriately increased. In short, adjusting the residence time of garbage in the furnace reasonably is necessary to ensure stable combustion of garbage.

Due to the large volume of the incinerator, the temperature distribution inside the furnace is uneven, meaning that different parts of the furnace have different temperatures. The incineration temperature referred to here refers to the high temperature that can be reached during the incineration of waste in a combustion chamber (combustion zone). Generally, the temperature in the area above the waste layer in the combustion section and close to the combustion flame is high, reaching 850-1100 ℃. The higher the calorific value of household waste, the higher the achievable incineration temperature, which is more conducive to the incineration of household waste. Meanwhile, temperature and residence time are a pair of correlated factors, and shortening the residence time appropriately at higher temperatures can also maintain better incineration efficiency.