The new filtration reactor is equipped with a table top bracket, a top mounted stirrer, and a glass reactor body. Thick walled glass reactors can provide Schott with diameters of 60mm, 100mm, or 150mm ® Type flange with O-ring groove at the top. Connect the 6517 quick release clip to the 6433 head. The bottom of the reaction vessel has an A thread type, which can be used to install 5838-83 (# 80) or 5857-86 (# 50) adapters with filter vessel brackets and bottom discharge valves. The top of the 60mm reactor has a # 15 A threaded central opening, and (2) # 15 and (1) # 7 A threaded side openings. At the top of 100mm, there is a # 15A threaded central opening, and (3) # 15 and (1) # 7A threaded side openings. At the top of 150mm, there is a # 15A threaded central opening, and (4) # 15 and (1) # 7A threaded side openings. A thread allows for use under vacuum or pressure conditions and is easy to discharge material from the reaction vessel. By designing the main bearing, funnel, and condenser to connect to the threads on the compression liner connector The 7A thread is used to connect 1/4 inch outer diameter pipeline fittings and can be directly connected to a pressure source or # 6448 pressure manifold.

For information on replacing porous glass discs and brackets, please refer to 5848 or 5814. Mixing motor, refer to 13511 or 13566; For information about the chuck, please refer to 8124 or 8126. Use 7855-829 CAPFE O-ring for # 50 adapter and 7855-864 for # 80 bottom adapter.

Attention: The complete item includes: reactor body with 60mm CAPFE O-ring, A-threaded s-head, 6517 fixture, PTFE bottom threaded adapter and valve with CAPFE O-ring, fixing ring, 350 μ m polypropylene screen bracket, 100 μ m polyethylene bracket, 5844 adapter, 8044 bearing, 8075 stirring rod, 8089 multi blade stirrer, 6024 condenser, 7299 feeding funnel, and # 7 A threaded sleeve The 80 bottom adapter also comes with a perforated glass plate bracket. Including pressure manifold, bracket, and support clamp.