This machine is a non parallel roller train model, with the main features being:

ØMain transmission systemUpper and lower rollersFor full main drive, it is driven by two motors, capable of emergency stop braking, with a soft start device, minimal impact on the power grid, reliable performance, low noise, and compact structure.

ØUp and downSupporting rollerFor multi column diameter support, arranged in a board like pattern with the work roll, and equipped with an integral inclined iron adjustment mechanism at the bottom,Manual fine-tuning methodAdjust up and downFlattening rollerRoll shape, to maintain the rigidity of the work roll, when flattening thin plates with wave bending, convex concave and ladle bending deformation, it is necessary to use support rollers to change the convexity of the work roll,ManualAdjust itFlattening rollerThe opening amount and inclination angle can easily adapt to correction requirements such as wave bending and scoop shaped plates.

ØAll work roll necks are equipped with rolling mill specific self-aligning needle roller bearings, which have higher transmission efficiency and longer service life compared to copper sleeves. The friction resistance of the work roll is small, and the non slip conditions are greatly improved, which can correct thinner steel plates;

ØAdopting a closed frame, the correction force is internally enclosed, and the frameThe appearance is simple, the overall rigidity is good, and it can be fully loaded and leveled without laying the foundation；

ØThe downward turning mechanism and the turning mechanism are integrated using group technology, utilizing two identical power systemsYEJ type motor drive enables the movable crossbeam to accurately and automatically position and quickly swing angles;

ØSet a larger lifting height on the activity crossbeamConvenient for machine roll replacement and maintenance;

ØUsing an electric dual line oil feeder for centralized lubrication, separate lubrication is applied to lubrication points such as the working roller, support roller bearings, worm gear box, and screw through the electric dual line oil feeder and dry oil pipeline;

ØAdvanced measurement and electrical control systems,The equipment adopts Siemens from GermanyPLC S7 control. On the control panel, the inlet and outlet pressure can be set according to parameters such as plate thickness, plate width, material, and original curvature. PLC has the function of editing, storing and memorizing process parameters, which can be called and corrected at any time;

ØComplete protection functionsThe exposed rotating body such as the drive shaft is installed with a protective cover, and the feeding port is protected by a photoelectric switch.