ORIGIO^®/ PLANER Benchtop Incubator BT37

The BT37 desktop incubator is designed primarily for cell culture, especially for IVF applications
The incubator will ensure that cells maintain a constant clean environment for embryos at the optimal temperature, humidity, and gas content. BT37 works in any defined mixture of gases, with the optimal choice of gases with low CO2 and O2 concentrations.
The incubator is a temporary residence for embryos, which must replicate the conditions inside the human body and reduce changes in temperature, humidity, and pH value of the embryos.
Accurate control of the cultivation room to achieve a balanced environment consistent with the human body is necessary. The BT37 desktop incubator is the most precise of its kind, ensuring that embryos are minimally (or even unaffected) by temperature and pH changes.
The structure is compact and small, making it easy to place anywhere in the laboratory, including display cabinets. Separate cultivation rooms increase safety. The airflow control adopts a unique selection of continuous, pulse, and blended options, which can effectively optimize the conditions for cell culture and reduce gas consumption.
BT37 desktop incubator, the best cell culture environment
System specifications
Physical specifications
Size: 420x270x210mm
Weight: 15.5 kilograms
Storage temperature range:- 10——+50 ℃
Storage humidity range: 5% -95% relative humidity, no condensation
Operating environment: Indoor only
Operating temperature:+5-+40 ℃. Refer to the temperature control range limit
Operating humidity: 5% -90% relative humidity, no condensation
Altitude: below 2000m
Pollution level: Pollution level 2 (BS EN61010-1)
control
Temperature control range: room temperature+5 ℃ -40 ℃
Temperature testing accuracy: plus or minus 0.2 ℃
Temperature control accuracy: 0.1℃
Airflow control range: 0-900ml/minute (Airflow testing is usually conducted at 0 ℃, 50% humidity, and 1BAR pressure)
Airflow accuracy: 10% of the maximum value, or plus or minus 0.3ml/minute
Airflow control accuracy: 5% of the maximum value, or plus or minus 0.2ml/minute (tested after stabilization)
capacity
Number of dishes that can be accommodated in each culture room:
4 x NUNC 4 well dishes
4 x NUNC 60 mm dishes
10 x NUNC 30 mm dishes
4 x MINITUB 5 well dishes
4 x FALCON 60 mm dishes
4 x FALCON 80 mm single-well “organ culture” dishes
Power Supply
Power supply: 100-230V/50/60HZ/1.1Ah
Internal battery: Gallod lead battery 12Vx12Ah
Gas control
Gas supply: Mixed gas, recommended 6% CO2, 5%O2 balance N2
Gas supply pressure: 1.5 ± 0.15 bar
Connector: 1/4 connector locking nut.
call the police
The incubator provides 3 alarm modes. The no voltage terminal provides normally open and normally closed contacts. The incubator provides 3 3Volt free terminals which provide
normally-open and normally-closed contacts。
Remote monitoring
LAN: Provides 145 interfaces to meet TCP-IP protocol
Remote sensor PT100: PT100
In order to meet the monitoring requirements, the sensor must meet the following specifications: maximum diameter of 2.51 millimeters and minimum length of 100 millimeters. The sensing area should be within 15 millimeters of the tip.