The 2000 forced concrete mixer has the following advantages

1. Advanced technology

The circular arc part of the mixing drum is welded, and there are five types of lining plates embedded inside the mixing drum, all of which are fastened to the drum body with countersunk screws.

2. Good sealing performance

To ensure the quality of the seal, a dedicated oil supply device is installed on the end face of the mixing drum.

3. Strong stirring force

The two output shafts of the reducer drive two horizontally arranged mixing shafts to rotate in opposite directions at a constant speed through two pairs of open gears.

4. Easy to operate

All electrical control systems use imported foreign components, which are fully functional, reliable in performance, and easy to operate and use.

Product parameters of 2000 forced concrete mixer

2000 Forced Concrete Mixer Structure

The feeding system of the 2000 forced mixer consists of a hoisting mechanism, feeding rack, hopper, feeding nozzle, etc.

1. Loading rack

Install limit switches on the feeding rack, with two limit switches for the upper limit, which respectively limit the lifting of the hopper and provide safety protection. The upper part of the feeding rack can be folded.

The 2000 mixing system consists of an electric motor, pulley, reducer, open gear, mixing drum mixing device, oil supply device, etc.

The electric motor of the 2000 forced concrete mixer is directly connected to the cycloidal pin reducer, and the two output shafts of the reducer drive the horizontally arranged mixing shaft to rotate at a constant speed in reverse through split gears.

The circular arc part of the mixing drum of the 2000 concrete mixer is welded, and there are five types of lining plates embedded in the mixing drum, all of which are connected and fastened to the drum body with countersunk screws.

The discharge system of the 2000 forced concrete mixer consists of a discharge hopper, an air pump, a directional valve, a distribution valve, a cylinder, electrical and other mechanisms.

The discharge door of the 2000 forced mixer is installed at the bottom of the mixer, and pneumatic discharge is achieved through a cylinder. The opening and closing position of the discharge door can also be controlled, and the sealing of the discharge door can be ensured by adjusting the position of the sealing strip.

The 2000 manual unloading lever is used for emergency unloading during temporary power outages and when the cylinder fails. It should be removed regularly to prevent injury.

Due to differences in production batches and specific models, the above pictures are for reference only. For details, please contact our sales personnel for specific verification.

Physical picture of 2000 forced concrete mixer