3D dynamic CO2 laser marking machine-Fornitore globale

Tianxiong Laser, 1st Floor, Poly Industrial Park, No. 10 Huiyuan Road, Wangniudun Town, Dongguan City

Introduction to 3D Dynamic CO2 Laser Marking Machine Models

The 3D dynamic CO2 laser marking machine (large format CO2 laser marking machine) adopts 3D dynamic focusing technology to maximize the working range of the laser. The applicable materials of the 3D dynamic CO2 laser marking machine (large format CO2 laser marking machine) are the same as those of ordinary CO2 laser marking machines, but it adds a large working area and a compensation system for the large height difference of the surface. Therefore, only the 3D dynamic CO2 laser marking machine can achieve good results for irregular surfaces.

Structural analysis of three-dimensional dynamic CO2 laser marking machine equipment

Three dimensional dynamic CO2 laser marking machine (large format CO2 laser marking machine) components: three-dimensional dynamic mirror, laser, chiller, laser control card, power control cabinet, customized rack, computer and other electronic components
1. 3D dynamic galvanometer: The 3D dynamic CO2 laser marking machine (large format CO2 laser marking machine) adopts a front mounted dynamic focusing galvanometer, and the built-in lens group uses imported 26 company 10.6um band coated galvanometer lenses, which are driven and assembled by CTI motors. The dynamic axis is equipped with THK high-speed guide rails, which have fast response speed, high accuracy, fast speed, minimal light loss value, fast heat dissipation, and 20% efficiency improvement. The maximum area marking can reach 1.5 meters;

2. Laser: Three dimensional dynamic CO2 laser marking machine (large format CO2 laser marking machine) The laser adopts imported metal RF tube with 5V low voltage RF control for laser power, stable light output, no change in laser intensity due to voltage changes, and long service life.

Parameter table of 3D dynamic CO2 laser marking machine

average output power	30W	60W	100W	150W	300W
wavelength	9.3um/10.64um
Pulse width/Q frequency	(Adjustable) Fixed pulse width/1kHz-100KHz
Average power/peak power	30 watts/40 watts	>60 watts/>90 watts	>100 watts/>300 watts	>150 watts/>400 watts	>300 watts/>600 watts
Marking format	3D dynamic CO2 laser marking machine marking format: 300mm * 300mm ---1500mm * 1500mm
galvanometer	Water cooled 3D dynamic focusing galvanometer
Carving line speed	≤7000mm/s
Cooling method	forced air cooling	water-cooling	water-cooling	water-cooling	water-cooling
Minimum character height	0.2mm		0.04mm
Laser tube type	Imported metal RF tube (inflatable and reusable)
Overall dimensions (L * W * H)	800mm × 680mm × 1200mm (depending on the specific situation)
power supply	AC 220V 50KHz
upgradeable	Electric lifting manual two-dimensional worktable, electric two-dimensional table rotating fixture, red light focusing

Advantages of 3D dynamic CO2 laser marking machine software

1. Software ports are open and can be customized according to device or production line requirements;
2. Optional 3D marking software can easily achieve surface marking and 3D relief.

Application scope of 3D dynamic CO2 laser marking machine

The 3D dynamic CO2 laser marking machine (large format CO2 laser marking machine) is mainly used for laser processing of ultra large formats, or for laser processing of objects with large height differences. It is mainly suitable for non-metallic and partially electroplated painted metal materials, such as leather fabrics, acrylic, ceramic marble, bamboo products, wood, paper, etc.

Precautions for the application of 3D dynamic CO2 laser marking machine

1. When using a 3D dynamic CO2 laser marking machine (large format CO2 laser marking machine), it is strictly prohibited to look up from below the laser galvanometer, as this may cause the laser beam to enter the eyes and cause permanent damage.
2. When operating a small 3D dynamic CO2 laser marking machine (large format CO2 laser marking machine), it is important not to suddenly turn off the power, as this may cause the laser software to be lost or even the computer to fail to open properly. The hardware of the machine may also be damaged. It is recommended to equip it with a PUS power stabilizer.
3. Do not frequently move the 3D dynamic CO2 laser marking machine (large format CO2 laser marking machine), because the optical components inside the machine have been adjusted for position and angle at the factory. Frequent movement of the position will cause the internal components to change angle due to vibration, and the machine cannot be used normally.
When it is not applicable for a long time, the main power supply needs to be disconnected.
5. Do not browse high-risk websites on the computer of the 3D dynamic CO2 laser marking machine (large format CO2 laser marking machine) to prevent laser engraving with garbled characters after being infected with viruses.
6. Machine equipment needs to be effectively grounded. Some customers' power sockets do not have grounding wires, which can cause static electricity and users may frequently come into contact with static electricity.
7. When working on the 3D dynamic CO2 laser marking machine (large format CO2 laser marking machine), do not place your hands within the working range, because the 10.64um wavelength laser beam of the 3D dynamic CO2 laser marking machine (large format CO2 laser marking machine) will burn your hands. If it is hit on your hands within the focal length range, it will directly break the skin and flesh, so be careful.

3D dynamic CO2 laser marking machine after-sales service

Delivery list for 3D dynamic CO2 laser marking machine: delivery note, metal adjustment plate, tool set, training service list, high concentration alcohol, dust-free cloth;
After sales and service of 3D dynamic CO2 laser marking machine: home delivery, technical engineer on-site installation, debugging and training, lifelong technical support, lifelong software free upgrade, 2-hour response after sales, on-site processing within 24 hours, after-sales phone: 400-829-662