The 480 type fully automatic anode plate forming machine forms a high-voltage electric field between the cathode wire connected to a high-voltage DC power supply and the grounded anode plate. Due to corona discharge at the cathode and ionization of gas, negatively charged gas ions move towards the anode plate under the action of the electric field force. During the movement, they collide with dust particles, causing the dust particles to be negatively charged. The charged dust particles also move towards the anode under the action of the electric field force, and after reaching the anode, they release negative charges. The dust particles deposit on the anode plate, and the purified gas is discharged outside the dust collector.

Technical parameters of 480 type fully automatic anode plate forming machine:

Equipment total length: 12m

Width: 1m

Height: 1m

Motor power: 11Kw+4KW

Working voltage: 380V

Production speed: 6 meters per minute

Whole machine forming shaft: a total of 18 rows of shafts

Large frame: 400H steel, 16mm vertical plate

Numerical Control System: PLC Panel, KEL-320 Display

Forming system: Shaft (45 steel) diameter of 80, compression mold made of wheel bearing steel quenched, hardness of 50 degrees

Counter: using domestic photoelectric rotary encoder, A40S6-600-2-12-ACP

Cutting system: 4KW pump station, fully automatic punching and cutting