1、 Equipment Introduction

1Double layered spiral blades are arranged on the main drive shaft of the horizontal spiral belt mixer. The internal spiral transports the material away from the discharge port direction, while the external spiral transports the material towards the discharge port direction. Under the convective motion of the double-layer spiral belt, the material forms a low power high.Efficient mixed environment.

2The inner and outer diameter screws installed on the mixing shaft drive the material inside the bucket, allowing the mixer to enlarge the range of flipping the material inside the bucket. When the mixing device is working, the inner screw drives the material near the axis to rotate axially and push away from the discharge port, while the outer screw drives the material near the barrel wall to rotate axially and push towards the discharge port. This mixed material can be uniformly mixed in a short period of time.

3Side bottom discharge method: The powder material adopts a pneumatic gate structure, which has the advantages of fast discharge and no residue.

4The feeding can be equipped with a bucket elevator device, which has good feeding effect, no blockage, and occupies less land.

2、 Applicable fields

1Widely used in various powders and particles, such as putty paste, warm baby iron powder, real stone paint, dry powder, putty, medicine, food, chemicals, feed, ceramics, refractory materials, etc-Solid (i.e. powder to powder), solid-Mixing of slurry (i.e. powder and adhesive solution).2In general,Mixing dry powder sand slurry containing vitrified microbeads,Recommend a horizontal screw belt mixer.

3For industries such as putty, real stone paint, biology, medicine, and food, it is recommended to use stainless steel material.