The disc granulator consists of a large plate, large gear, transmission part, frame, base, scraper frame, and unpowered scraper.

The structure of the disc granulator is novel and reasonable, with reduced weight and height. The process layout is flexible and convenient, suitable for the renovation of old factories.

The market tilt angle can be adjusted. Using angle washers and height screw bolts for flexible and convenient adjustment.

The use of a unique non powered combination scraper reduces auxiliary power consumption.

The market is composed of a market body and market segments. Reduce the power of the electric motor. The disc joint can be adjusted up and down along the disc body. The end of the disc is a flange, which ensures that the material ball is not pulled or torn when it is released from the disc.

The brand new dredging design uses a non powered combination scraper to clean the edges and bottom, a corner cleaning scraper to clear the corners, and a unique processing technology for the disc body. The dredging and ball forming effect is good, and there will be no large mud lumps. 90% of the ball diameter is between 3-5mm.

Performance characteristics of disc granulator

The spherical granulator adopts an integral circular arc structure, with a granulation rate of over 93%. The reducer and motor are driven by flexible belts, which ensures smooth starting, reduces impact force, and improves equipment service life. The bottom of the spherical granulation disc is reinforced with multiple radiating steel plates, which are sturdy, durable, and not deformed. Thickened, weighted, and sturdy base design, no need for anchor bolts to fix, smooth operation. The granulation disc is equipped with three discharge ports, which facilitate intermittent production operations, greatly reducing labor intensity and improving labor efficiency.

Factors determining the diameter of a 1-meter disc granulator

The diameter of a small disc granulator is mainly determined by the output, based on the production capacity of the compound fertilizer processing equipment and the matching requirements of the organic fertilizer equipment. However, when the diameter of the disc granulator exceeds 4.5 meters, there are certain difficulties in manufacturing. Once the diameter of the disc granulator is determined, the height of the disc can also be basically determined. Generally speaking, the larger the diameter, the higher the disc height, but the height of the disc can also affect the granulation time of the material on the disc