■ Compact structure, small size, and complete functions

The driver can automatically adjust the operating current according to the load situation to reduce motor temperature rise and vibration

Controllers with different functions such as JBT-BM voltage type, JBT-BT communication type, QBT-M1 pulse type, etc. are available for users to choose from

The applicable power supply voltage range can reach+12V to+36V, and the speed regulation range is 0-600rpm

The driving current has 3A low-speed type and 5A high-speed type, and can be set and adjusted through a dip switch

The signal indicator light on the circuit board can directly observe the operating status of the motor, and the motor speed can also be detected through the signal indicator light

The terminal block can be selected from multiple options for the exit orientation according to the customer's application situation

Technical parameters:

PRODUCT MODEL	JBT-BM	JBT-BT	QBT-M1
Product images
Use power supply	DC 12-36V, ≤ 4A (recommended 120W power supply for 90% users)
Power usage	<54W (working current<1.5A)
work environment	Temperature 0-60 ℃, relative humidity<85% RH
Product weight	72g	72g	70g
Adapt motor	57 type stepper motor
speed range	0-600rpm
External control switch	Built in potentiometer to adjust speed, dip switch to set maximum speed and drive current	Set the communication address, communication parameters, and driving current for the dip switch	The dip switch is used to set the input fine fraction, VCC voltage, and driving current
function	Start stop, forward and reverse rotation, speed up and down (with built-in potentiometer, external voltage or current to adjust speed)	Start stop, forward and reverse rotation, and acceleration/deceleration (controlled by MODBUS 485 protocol)	Capable of receiving pulses, directions, and enable signals

Product port wiring diagram:

Outline dimension diagram: