Changzhou Jintan District Huanyu Scientific Instrument Factory
Home>Products>600 Constant Temperature Circulating Water Tank (Three Uses)
600 Constant Temperature Circulating Water Tank (Three Uses)
Constant temperature circulating water tank (three uses) is mainly used for distillation, drying, concentration, and temperature preservation of chemi
Product details

Constant temperature circulating water tank (three uses)

1、 Technical parameters of constant temperature circulating water tank (three uses)

Specification and model

420

420

600

600

Special specifications

type

electron

Digital display

electron

Digital display

have sth. made to order

power supply

220VCommunication 50-60Hz

Power

800W

800W

1600W

1600W

on-demand

Temperature Control Range

RT-100℃ ±1℃

Water temperature fluctuation

≤0.5℃

working volume

420*180*200

420*180*200

600*300*210

600*300*210

on-demand

2、 Constant temperature circulating water tank (three uses) usage and maintenance

1When using, an appropriate amount of clean tap water must be added to the box first, or hot water can be added at the desired temperature to shorten the heating time.

2Connect the power and select the temperature.

When equipped with an electronic thermostat, adjust the "temperature knob" clockwise to the desired temperature, which is the heating state and the green indicator light is on. When heated to the desired temperature, the red indicator light will turn on, indicating a constant temperature state.

When equipped with a digital display head, the maximum digit of the counter is ten, and pressing the "+" symbol indicates an increase, while pressing the "-" symbol indicates a decrease. The traffic lights change with the temperature inside the box. Similarly, the green light indicates that the heater is working, while the red light indicates constant temperature.

To achieve the correct temperature accuracy using this instrument, it must be heated and kept at a constant temperature for at least two times (it must be fully covered and sealed).

3After the work is completed, set the temperature control knob and the potentiometer to the lowest value and cut off the power.

4If you want the water temperature inside the box to reach 100 ℃ for boiling water distillation, you can adjust the knob to the end point.

5Do not add too much water to prevent the water from overflowing outside the tank when boiling.

6The water volume inside the box should not be less than half, and the heating tube should not be exposed to the water surface to avoid burning out, causing water leakage and electric leakage.

7When using this product, the three pin socket must be effectively grounded.

3、 Complete List of Thermostatic Circulating Water Tank (Three Uses)

11 power cord 2. 1 product color picture 3. 1 maintenance card 4. 1 instruction manual

Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!