sensitivity

sensor type

90 ° light scattering, 650nm laser diode

calibration

According to ISO12103-1 standard, use Al to test the respiratory dust particle size range of dust, and calibrate using the sampling and weighing reference method

aerosol

concentration range

0.001-100mg/m3

particle size range

0.1-10μm

resolution

0.001mg/m3

Zeroing stability

Using a 10 second time constant, the change over 24 hours is 0.001mg/m3 of soil

temperature coefficient

Approximately+0.0005mg/m/℃

(Change in temperature during one zeroing on the instrument)

internet traffic

range

User adjustable range: 0-1.BL/min

Note: The higher range is connected to SidePak AM520

Determine the particle size cutter and cyclone separator of the monitoring device.

temperature range

Operation range

32°F-120°F(0°C-50°C)

Storage range

-4°F-140°F(-20°C-60°C)

Operating humidity

0-95% relative humidity, no condensation

time constant

(OLED display)

range

User adjustable range: 1 second, 5 seconds, 10 seconds, 15 seconds, and 30 seconds

Built in sampling head

Standard sampling head, no specific particle size range

PM1.0 particle size cutter intercepts 50% at 1.0 µ m

PM2.5 particle size cutter intercepts 50% at 2.5 µ m

PM5.0 particle size cutter intercepts 50% at 5.0 µ m

PM10 particle size cutter intercepts 50% at 10.0 µ m

Detachable cyclone separator

4 µ m Dorr Oliver intercepts 50% at 4.0 µ m

0.8 µ m DPM intercepts 50% at 0.8 µ m

alarm

Alert Type

Universal, S

default setting

0.5mg/m3, 1mg/m3, 3mg/m3, 5mg/m3

15mg/m3, closed

Range programmed through TrakPro software: 0.001-999mg/m3

alarm indicator

95 decibel speaker, flashing red LED,

Flashing red OLEO display

Second call delay

30 seconds, 1 minute, 3 minutes, 5 minutes, 10 minutes, off

data record

data point

Approximately 80000 (recorded once per minute for 55 days)

Record Interval

User adjustable intervals: 1 second, 1 minute, 5 minutes, 15 minutes, 30 minutes

User selectable correction factors

Factory settings

1.0 (user adjustable)

Environment settings

0.38 (user adjustable)

User defined settings

5 groups (user-defined tags through TrakPro software)

physical property

0.1-10.0 (user adjustable)

physical device

External dimensions

5.1 x 3.7 x 3.1 inches

129.5 mm x 94 mm x 78.4 mm

Containing 803300 batteries

weight

22 ounces (0.62 kg) containing 803300 batteries

display

160 x 128 resolution color OLED display

Tripod installation nut

¼ -20 internal thread

battery

Battery capacity

5400 mAH 捚 ion battery pack

run time

Using PM2.5 cutter at 1.7Lpm for over 20 hours

charging time

4.0 hours (typical case of completely depleted battery)

power supply

(pin 803302)

Input Voltage

100-240V AC, 50-60Hz

Output voltage

12V DC @ 3.0A

communication interface

type

US82.0

Instrument connector

USB Micro-8 (socket)

maintenance

Manufacturer cleaning/calibration

Suggest conducting it every year

User zero calibration

Before each use

User traffic calibration

According to the requirements of the sampling probe

authentication

AM520 using TSI battery pack P/N 803300

exempt

EN61326-1:2013

emission

EN61326-1:2013 Class B

secure

IEC 61010-1:2010

IEC 60825-1:2014

Serial Number

Instrument Name

model

quantity

notes

1

Oil fume dust detector

AM520i

1 unit

packing list

Accessory Name

quantity

Soft single portable bag

1 piece

100-240VAC power supply

1 piece

USB data cable

1 piece

Impact particle size cutter assembly

1 set

Dorr Oliver cyclone separator component

1 piece

Diesel engine particulate matter cyclone separator component

1 piece

screwdriver

1 piece

TrakPro Data Analysis Software CD

1 copy

Micro USB connection cable

1 piece

Zero filter for calibration

1 piece

Sampling tube

1 piece

CALIBRATION CERTIFICATE

1 sheet

user's guide

1 book

Quick reference card

1 sheet