Product Introduction:

The ARINC664 terminal network card is a high-performance ARINC664 protocol simulation test terminal network card, providing 2, 4, and 8 ARINC664 ports with configurable port speeds of 10/100/1000Mbps. The ARINC664 terminal network card supports multiple operating systems and can quickly access the ARINC664 network. Combined with users' actual business applications, it realizes the simulation and testing functions of ARINC664 network bus nodes, providing an efficient solution for debugging, verification, and fault location.

Product Features

• Comply with ARINC664 PART7 specifications

·Support Sampling, Queuing, SAP ports

·Support ICMP protocol

·BAG range 0.5~128ms

·Support VL traffic shaping control

·Sending and receiving delay less than 150us

·Support 4 sub VLs

·Supports sending and receiving 8KB data frames

• Supports 128 sending VLs and 1024 sending ports

• Supports 512 receiving VLs and 4096 receiving ports

• Supports 2, 4, and 8 ARINC664 ports

• Port speed support 10/100/1000Mbps configurable

• Support SNMP and 615A loading and unloading functions

• The board provides acquisition mode

·Support point-to-point collection

·Support BYPASS collection

• The board provides fault injection mode

·Support injection of ARINC664 protocol layer faults

·Support setting fault frame time intervals with microsecond level accuracy

• Support high integrity protocols (optional)

·Support source integrity

·Support bit integrity

·Support sequential integrity

·Support time integrity

• Supports IRIG-B clock synchronization interface, with a clock synchronization accuracy of 0.5us

• The board provides a receiving time tag with a time accuracy of 0.5us

• Supports 4 TTL users with configurable trigger I/O

• Provide FZ-BEST supporting software

Product Application

Network simulation: The board provides a simulation mode to enable it to operate in an onboard state. Users can use this mode to simulate the working status and data of onboard bus equipment

According to the communication receiving and sending methods.

Data collection: The board provides a collection mode to enable the board to work in ground collection mode, supporting direct collection of ARINC664 data frames and packets on the network

Including all data contents such as the leading bit of the data frame, frame header, data area, and CRC check area.

Fault injection: The board provides a fault injection mode, allowing it to operate in ground testing mode and inject ARINC664 network faults, including frame alignment errors, frame gap errors, preamble errors, SFD errors, CRC errors, MAC address errors, Ethernet type errors, frame length errors, etc.

Technical Parameter

Ordering Information