Introduction to Analog Signal Speed Displacement Dual Display Instrument: XF2S-M Counting Display Meter is a dual display position counting, control, and display module with seven bit displacement display and five bit speed display. Can be widely applied in the field of industrial control.

The internationally recognized 160 × 80 × 125mm standard chassis features a seven digit 0.6-inch digital display with displacement. Five digit 0.56-inch digital tube display speed.

◆ Can input any resistance value from 1K-100K, current input 4-20mA, voltage input 0-5V, 0-10V.

◆ Equipped with an external reset terminal, which can be controlled by an external switch to reset.

Set two control values for displacement and velocity, each with two single pole double throw relay outputs, which can be used for control or alarm. Up to 6 relay outputs, customizable.

All relay outputs can be set with automatic delay reset time to achieve automatic delay reset function.

Both displays have peak display function.

Both counting and speed are displayed simultaneously.

◆ Parameter setting password protection function.

The set value will not be lost in case of power failure.

◆ The magnification can be set to determine the proportional relationship between the input and display values. This item is invalid after calibration.

Multi point calibration: Linear calibration can be performed on up to 9 points (excluding the starting 0 point), with any number of calibration points ranging from 1-9.

Input filtering: It can filter input errors or interference signals to varying degrees and can be set.

◆ It has 485 communication function. The communication baud rate can be set, with a default of 9600bps. There are 8 data bits and 1 stop bit without a checksum. The upper computer can read various measurement data and modify all setting parameters except for the parameter protection password at any time. Please refer to the communication protocol for details.

Technical parameters

◆ Power supply voltage: AC187V~242 V 50Hz

◆ Magnification range: 0.001~9999.999

Measurement accuracy: ± 0.05%.

Display range: Displacement: -999999~999999, Speed:- 9999~99999.

◆ Alarm output: AC220V10A DC30V10A

Installation method: snap in type

Opening size: 150 × 75mm

◆ Environmental temperature: -40 ℃~85 ℃