SANBEN 3/4Inch compositepH/ORPelectrode

Technical instructions

pHsensor

Liquid receiving material: Universal type:RytonBody (with glass inside)

Insertion type: PVDFOntology（Kynar）

Measurement range: 0～14pH

Temperature range: 0～85℃

Slope: ≥96﹪

Accuracy: ＜0.1 pH

Zero point potential: E₀=7PH±0.3

Pressure range: 100℃Time 00～6.5bar

Flow rate range: 0-2m/sNon abrasive fluid

ORPsensor

Liquid receiving material: Universal type:RytonBody (with glass inside)

Insertion type: PVDFOntology（Kynar）

Measurement range: -2000～+2000 mV

Temperature range: 0～85℃

Accuracy: ±20mVLimited to standard solutions only

Pressure range: 100℃Time 00～6.5bar

Flow rate range: 0-2m/sNon abrasive fluid

ordering guide

The following are commonly usedpH/ORPIf there are special requirements for the ordering information of the probe, please callSANBONcompany

PH 406-1P Universal sewagepHProbe, with5ricecable

PH 406-1C Universal pure waterpHProbe, with5ricecable

PH 406-1T general usepHProbe, with5riceCable, resistant to hydrofluoric acid

PH 406-1R general useORPProbe, with5riceCable, platinum electrode

PH 406-1PMIndustrial PlanePHElectrode, with5riceCable, temperature compensation selection (used in industries with severe desulfurization and pollution)

SANBEN 3/4Inch compositepH/ORPElectricity has multiple materials and installation methods, which can be applied to various needs for measurementpH﹑ORPEnvironment: such as measuring acidic substances, alkaline substances, alcohol, carbon compounds, lipids, ketones, desulfurization, and other chemicals; Especially suitable for harsh environments such as municipal wastewater and industrial wastewater that require frequent replacement of sensors.

Features and advantages

★ mostpHandORPAnalyzer compatibility

★ useMolecular polymer filling, reference junction potential is very stable

★ selfDynamic temperature compensation

★ Specially designed for special applications

★ No need to supplement dielectric, low maintenance required

The sensor body is resistant to chemical corrosionRytonperhapsPVDFmaterial

★ High measurement accuracy, fast response, and good repeatability

★ Silver ionAg/AgCLreference electrode

★ The sensor has a sturdy circular electrodeEasy to clean flat electrode and durableHFElectrode of hydrofluoric acid

★ The dual salt bridge design of the reference electrode extends the service life of the sensor. In addition, the electrode has a built-in solution grounding

★ We use high-quality low-noise cables, which can make the signal output length greater than40riceAbove, no interference

Universal sensor

The universal sensor body adoptsRytonMaterial, with three-quarters inch on both endsNPTthread. The sensor can be directly installed in a standard three-quarters tee pipe as a flow-through installation or fixed at the end of a pipe as a submerged installation. three direct links|Immersion installation components come in various materials to meet different application scenarios.

plug-in sensor

The plug-in sensor has a longer size and no threadsPVDFMaterial body, with sealing ring, in conjunction withSANBENPlug in installation components provide a sealing effect when used together. The insertion and extraction of electrodes into pipelines or containers do not require interruption of the process flow.

PH 406-1TAntimony electrode

Antimony electrodeIt is a metal oxide electrode, where the common electrode potential is generated at the interface between the metal and the oxide covering its surface, hence it is also known as a metal oxide electrode. It iscalomel electrodeAs a reference electrode, using metal antimony as the measuring electrode, the potential difference between metal antimony and the solution is determined by the hydrogen ion activity in the solution, that is, the concentration of the solutionpHValue. Main applications andIndustries that are resistant to hydrofluoric acid liquids, such as steel plants.

PH 406-1PMplanar electrode

Using imported glass sensitive film, in1300Burning materials is carried out at high temperatures, with special manufacturing processes. The special material ball cannon is used as a flat surface, with strong anti pollution and easy clarity. The shell is made of polytetrafluoroethylene material, which provides high temperature resistance, corrosion resistance, acid and alkali resistance. Mainly used for measuring flat objects and in soilPHIndustries with high measurement and pollution levels.