EMS 9000The Type microwave oven is a high-precision microwave instrument specifically designed for laboratory use. Many steps in the preparation of immunohistochemistry samples using light or electron microscopy, such as fixation, staining, dehydration, decalcification, wax immersion, embedding, etc., are time-consuming,EMS 9000The prominent feature is to shorten the processing time of the organization.EMS 9000Fast and simple program setup, adjustable energy efficiency output, precise temperature control, well ventilated chamber, and three different time modes make it a highly advanced microwave tissue processing instrument in the world!

Temperature control（temperature control）：

EMS 9000The precise temperature control is not only reflected in preventing the high-temperature denaturation of tissue blocks inside the chamber, but also in the energy efficiency balance of microwaves in subtle parts of the tissue. Temperature control is directly achieved by the opening and closing of the magnetic tube, which is based on the pre-set energy efficiency level. The stainless steel temperature probe can be flexibly bent into any shape to adapt to containers of different shapes, and the temperature sensor is located at the end of the probe.

Energy efficiency setting（set effect）：

The setting of the output power percentage can be adjusted at any time during program operation to balance the relationship between microwave loading and microwave absorption.

Dual timing mode（Dual mode）：

1.Duration at a certain temperature: The timer starts counting after the temperature reaches the set point.

2.Total time: Timer from start“run”Start timing immediately, including the time for temperature rise and the time for reaching the set temperature for operation.

Two microwave power control modes（two power control modes）：

1.Temperature: Under temperature control, the power control is adjusted to a closed-loop form to achieve a set temperature.

2.Power: Under power control, power no longer cares about temperature.EMS 9000The shortest pulse frequency that can be provided is120Once every millisecond, this makes power regulation more precise and reliable.

characteristic:

l rated power825W,Capable of continuous adjustability

l Up to bubble tubes5individual

l Built in exhaust pipe, with safety design for instrument malfunction due to poor exhaust flow

l Precision adjustable work cycle:1Seconds or longer

l Magnetic tube heating

l Left door design

l Three different time modes (corresponding to three different microwave radiation modes)

l Multiple safety interlock devices: Do not close the door, do not operate, do not exhaust, do not operate, do not operate when the temperature exceeds the limit

l visual/Listen to dual prompts, in case of errors or misoperations

l All controls are fully automated

l The temperature probe can be bent and placed flexibly, greatly expanding the space

l The optional part has a built-in vacuum system that can be used for rapid infiltration of tissues

l Optional options include a refrigeration cycle system

advantage

l Easy to use: friendly touch keys, set parameters and store programs

l Multiple operating modes

l Flexible temperature probe

l Exhaust system, protecting health; Interlocking device for exhaust fan safety: The fan does not run and the machine does not operate

l Integrated board digital controller

Standard configuration of the instrument:

l 8Foot exhaust hose

l User Manual

l Microwave Companion

l Organize specialized disks for processing

l 74Hole organization embedding box basket frame

l Organize processing basin（2A)

l Special container（2A)

l Sample Holder

l Maintenance fluid

l Vacuum bowl and lid (standard when selecting a vacuum system)

Instrument parameters:

Optional attachments:

1.Microwave tissue processing cup (including chassis), as shown in the picture.

Figure 1Figure 2Figure 3

Figure 1: Sturdy, heat & chemical resistant guide allows exact placement of processing chamber every time

Figure 2: Lynx I specimen vial are locked in and tip-proof during processing. That’s the specimen basket it holder assembly in the rear vial

Figure 3: User may mix and match the basket configuration to match the workload

2.Vacuum optional, the system is assembled by the factory, and once selected, the vacuum system is already built-in when the instrument arrives.

Ordering information: