Automatic Sampling Machine VC-QY-01

Details

1、 Productpurpose

The VC-QY-01 automatic sampling machine adopts the latest technology and accessories, and is easy to operate. This machine is used for micro section sampling required for metallographic analysis of copper-clad laminates, rigid printed circuit board production processes, and various production processes.

IIProduct Features

1. Using high-quality pneumatic components and precisionX—YWork platform transmission, high accuracy, low vibration, and low noise.

2. Equipped with precision high-speed electric spindle, high precision.

3. Full touch screen operation panel, capable of storage1-99The group data is clear at a glance.

4. The sample size range is adjustable and has a wide applicability.

5. The sample thickness is as high as8mm(Including copper layer)16Below the layer, it can be applied to various multi-layer circuit board manufacturers. If the copper layer exceeds16The total thickness of the copper layer shall not exceed1mmIt can be achieved by pre drilling with a drilling machine.

6. The sampling machine adopts drilling and milling methods to avoid sample deformation and ensure testing accuracy

7. Elastic design, can be manufactured according to customers' special size requirements

IIIworking conditions

1. Working voltage:AC220V 50HzTriangle power socket port,Need a good grounding connection

2. Working pressure:8kg/cm², pipe diameter8MM

3. Environmental temperature:23±3℃

4. ambient humidity:20-70﹪RH

4、 Product parameters

1. Maximum sampling size: length×wide×Thickness=50×50×8mm

2. Set sampling size: determined according to customer requirements; (Usually)20mm×15mm）

3. Maximum sample size16*24"(Can be obtained)PCBAny position of the board)

4. Sampling machine spindle:50000r/min/220V/50Hz

5. Sampling machine gong knife:1/8”(Free replacement of gongs and knives, recommended)2.0mm）

6. Cutting method: After setting the sampling size, it will automatically feed until the slice is completely removed by the sampling machine vacuum cleaner

7. Sampling machine appearance: long×wide×tall=680×530×1200mm

8. Infrared lamp positioning

9. PLCProgram Design Control

   
   
   
   

[Return]