Detection principle:
COD:Measure the total absorbance of unreduced Cr6+and reduced Cr3+at a certain wavelength in a low range. Measure the absorbance of Cr3+produced by reduction at a certain wavelength under high range. After calculation by the microcomputer chip, the COD content (mg/L) is directly displayed.
Ammonia nitrogen:Ammonia nitrogen, which exists in the form of free ammonia or ammonium ions, reacts with Nessler's reagent to form a yellow brown complex. The absorbance of this complex is proportional to the ammonia nitrogen content and is measured at a wavelength of 420nm. After calculation by the microcomputer chip, the ammonia nitrogen content (mg/L) is directly displayed.
Total phosphorus:Add persulfate to the sample to convert all phosphorus in the solution into orthophosphate. The orthophosphate in the sample reacts with ammonium molybdate in an acidic medium in the presence of antimony salt to form phosphomolybdic acid, which is immediately reduced by ascorbic acid to form a blue complex. Measure the absorbance at 700nm. After calculation by the microcomputer chip, the total phosphorus content (mg/L) is directly displayed.
Scope of application:
It can be widely used in colleges and universities, research institutes, sewage treatment plants, environmental monitoring stations, electroplating, petrochemicals, papermaking, pharmaceuticals, printing and dyeing, textiles, leather, brewing, dairy industry, electronics, municipal engineering and other industries.
Instrument appearance:
Figure 1 Water Quality Tester
Figure 2 16 well digestion apparatus
Technical parameters:
Measurement parameters |
COD (Chemical Oxygen Demand) |
Ammonia nitrogen |
total phosphorus |
measuring method |
HJ/T399-2007 |
HJ535-2009 |
HJ671-2013 |
Measurement range |
0-10000ppm (segmented) |
0-50ppm (segmented) |
0-20ppm (segmented) |
limit of detection |
5ppm |
0.01ppm |
0.02 ppm |
Dissolving temperature |
165℃,15min |
--------- |
125℃,30min |
resolution |
0.001ppm |
||
accuracy |
When COD>50ppm, ≤ 5% |
≤5% |
≤5% |
repeatability |
≤5% |
||
Optical stability |
≤ 0.001A/20 minutes |
||
power supply |
AC(220V±5%),50Hz |
||
ambient temperature |
5~40℃ |
||
ambient humidity |
≤ 85% non condensing |
||
weight |
Host<3kg, disintegrator<6.7kg |
Product features:
1. Using the EPA approved method in the United States, in accordance with HJ/T399-2007, the measurement is accurate and effective.
2. Adopting imported high brightness and long-life cold light source, with excellent optical performance and a light source lifespan of up to 100000 hours.
3. Large LCD screen with full Chinese display, direct data reading, simple and time-saving operation.
4. Integrated digestion and colorimetric analysis, no need to replace the tube, simple and fast measurement, and no safety hazards.
5. It can save 80 standard curves and 1800 measured values (date, time, parameters, test data).
6. Memory standard working curve, users can also calibrate the curve as needed.
7. One click factory reset, which can quickly recover in case of curve loss caused by misoperation.
8. It has data storage function and power-off protection function, making it convenient to query historical data and prevent data loss.
9. The digestion instrument adopts intelligent PID temperature control technology and a dual anti overheating protection system, ensuring safe and uniform heating with fast speed.
Used for the digestion of COD, total phosphorus, total nitrogen and other projects.
Standard configuration:
One set of mainframe, one set of 16 well digestion analyzer, one set of colorimetric tube, one set of three parameter reagent, one colorimetric rack, and so on.