VIP member
Product details
BINDER FD720 drying oven
1、 Product Introduction:
1. Temperature range: ambient temperature plus 12 ℃ to 100 ℃
2. Utilizing APT.line technology to achieve high temperature accuracy
3. Circulating air
4. Controller with LCD display
5. Exhaust valve electromechanical control
6. Interior door made of safety glass (ESG)
7. 2 chrome plated sockets
8. Integrated independently adjustable temperature safety device Class 3.1 (DIN 12880), equipped with optical alarm
9. Ergonomic handle design
10. USB interface for recording data
2、 Technical parameters:
| Product model | FD720-230V1 |
| Choose a model | standard |
| Item code | 9010-0311 |
| measure | |
| Internal volume [L] | 741 |
| Net weight of equipment (unloaded) [kg] | 166 |
| Maximum total load [kg] | 315 |
| Maximum load per partition [kg] | 45 |
| The dimensions of the casing do not include additional components and connectors | |
| Net weight width [mm] | 1165 |
| Net weight at height [mm] | 1590 |
| Depth net weight [mm] | 870 |
| Wall to side distance [mm] | 100 |
| Wall distance from rear [mm] | 160 |
| Internal dimensions | |
| Width [mm] | 1000 |
| Height [mm] | 1300 |
| Depth [mm] | 570 |
| The number of doors | |
| Outer door | 2 |
| Data related to the environment | |
| Energy consumption at 150 ℃ [Wh/h] | 800 |
| Sound pressure level [dB (A)] | 43 |
| firmware | |
| Number of partitions (hours/maximum) | 2/16 |
| Temperature performance data | |
| The temperature range exceeds the indoor temperature by 12 ℃ to [℃] | 300 |
| Temperature deviation is 150 ℃ [± K] | 2.5 |
| Temperature fluctuation at 150 ℃ [± K] | 0.6 |
| Heating time to 150 ℃ [min] | 25 |
| The recovery time after opening the door in 30 seconds is 150 ℃ [min] | 6 |
| Electrical data | |
| Rated voltage [V] | 400 |
| Power frequency [Hz] | 50/60 |
| Rated power [kW] | 4.5 |
| Equipment safety device [A] | 3 x 16 |
| Phase (rated voltage) | 3～ |
1. All technical data is only applicable to standard specifications of unloaded equipment at an ambient temperature of 22 ± 3 ℃ and a power supply voltage fluctuation of ± 10%. Determine temperature data according to BINDER factory standards and DIN 12880:2007, and adapt to the recommended wall gap of 10% of the internal chamber height, width, and depth. For series devices, all data are typical averages. The technical data assumes a fan speed of 100%. We reserve the right to make technical changes.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-