BINDER KBWF720 Growth Chamber

1、 Product Introduction:

1. Temperature range: 0 ℃ to 70 ℃

2. Temperature range with illumination: 10 ℃ to 60 ℃

3. Humidity range: 10% relative humidity to 80% relative humidity

4. 3 variable positioning lighting boxes, each with 5 fluorescent tubes

5 APT.line ™ Preheating chamber technology

6. Adjustable fan speed

7. Using capacitive humidity sensors and steam humidification for humidity regulation

8. Intuitive touch screen controller using interval programming and real-time programming

9. Internal data logger and open format measurement values can be read through USB

10. Equipment self-test is used for comprehensive status analysis

11. The sealed inner door is made of safety glass (ESG)

12. Preventing corrosion of glass through special TIMELESS coating

13. Display through LCD color monitor

14. 3 sockets made of stainless steel

15. Access hole with silicone plug 30mm, left

16. Independently adjustable temperature safety device Class 3.1 (DIN 12880), equipped with optical and acoustic temperature alarms

17. Computer interface: Ethernet

18. Door heating

2、 Technical parameters:

1. All technical data is only applicable to standard specifications of unloaded equipment at an ambient temperature of 22 ± 3 ℃ and a power supply voltage fluctuation of ± 10%. Determine temperature data according to BINDER factory standards and DIN 12880:2007, and adapt to the recommended wall gap of 10% of the internal chamber height, width, and depth. For series devices, all data are typical averages. The technical data assumes a fan speed of 100%. We reserve the right to make technical changes* The average value measured under the illumination box using a spherical sensor (± 10%) 12 cm at 25 ℃. The measurement unit is W/m2, which involves total radiation.