Product details:

Plate heat exchanger is a new type of high-efficiency heat exchanger composed of a series of metal sheets with certain corrugated shapes stacked together. Thin rectangular channels are formed between various plates for heat exchange. Plate heat exchangers are ideal equipment for heat exchange between liquid and liquid, as well as between liquid and vapor. It has the characteristics of high heat transfer efficiency, low heat loss, compact and lightweight structure, small footprint, easy installation and cleaning, wide application, and long service life. Under the same pressure loss conditions, a heat recovery rate of over 90% can be achieved with a footprint of one-third of that of a tubular heat exchanger.

A plate heat exchanger is composed of a set of corrugated metal plates with holes on them for the passage of two types of heat transfer liquids. The metal sheet is installed in a frame with a fixed plate and a movable clamping plate on one side, and clamped with clamping bolts. The plate is equipped with sealing gaskets, which seal the fluid channels and guide the fluid to flow alternately into their respective channels.

Advantages of Plate Heat Exchanger:

High heat transfer efficiency and low heat loss;

Compact and lightweight structure, with a small footprint;

Easy installation and cleaning;

Widely applicable and with a long service life

Parameters of the BR0.8 series heat exchanger on the board:

Dimensions of the board: 1747*605*0.7

Single piece heat exchange area: 0.84 ㎡

Board spacing: 4.5mm

Single channel cross-sectional area: 0.00226 ㎡

Maximum processing capacity: 130-400 m3/h

Flange diameter: 200DNmm

Working temperature: ≤ 180°C

Work pressure: 0.6-1.0-1.6MPa

Corner hole diameter: 200mm