VIP member
BS6040PE heat shrink packaging machine
The PE film heat shrink packaging machine series, based on the jet heat shrink machine, has increased the capacity of the shrink chamber and equipped
Product details
Product Description
The PE film heat shrink packaging machine series, based on the jet heat shrink machine, has increased the capacity of the shrink chamber and equipped with a higher power transmission motor, thus having a higher load-bearing capacity. High power internal circulation fans are used to provide more uniform and sufficient internal circulation hot air in the shrink chamber, thereby ensuring the shrink packaging of larger items.
The PE film heat shrink packaging machine series, based on the jet heat shrink machine, has increased the capacity of the shrink chamber and equipped with a higher power transmission motor, thus having a higher load-bearing capacity. High power internal circulation fans are used to provide more uniform and sufficient internal circulation hot air in the shrink chamber, thereby ensuring the shrink packaging of larger items. This machine adopts electronic stepless speed regulation, with a wide range of speed adjustment. The heat shrink chamber adopts a fully enclosed hot air circulation device, and the product shrink packaging effect is good. This device has a novel and beautiful appearance, easy operation and maintenance, and can be used for shrink packaging of any shrink film. (Various specifications of models can be customized according to customer needs).
Scope of application:
This shrink machine is a PE film heat shrink packaging machine, used in industries such as beverages, food, and decoration. It is suitable for PE film or other plastic film packaging of mineral water, beer, cans, flooring, etc.
Operating procedures and precautions:
1. Connect to 380V voltage, which must also input zero phase.
2. Close the conveyor switch and adjust the speed by turning it to a medium slow speed.
3. Close the hot air switch and the circulating fan will start working.
4. Close the heating switch and the machine will start heating up. The preset temperature of the machine is generally around 170 ℃. When setting the temperature, press the SET button first, then press the ▲ or ▼ button. After reaching the desired temperature, press the SET button again. Attention: The hot air switch must be turned on before heating can be turned on.
In practical operation, if there are too many wrinkles after shrinking the packaging, the conveying speed can be reduced or the heating temperature can be increased. On the contrary, if there is excessive shrinkage and rupture, the temperature can be reduced.
6. After packaging, turn off the heating switch and let the conveyor motor and fan continue running for about 10 minutes before cutting off the power.
7. The cross-sectional area of the input wire of this machine must exceed 6mm2, and it is prohibited to use this machine in household power supply.
8. The machine must be installed horizontally, otherwise the mesh belt is prone to deviation. After using it for more than six months, the aging degree of the wires should be checked and replaced as appropriate.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-