Product Introduction and Usage:

BZY seriesFully automatic surface tension meterIt is a laboratory measuring instrument that uses physical methods instead of chemical methods to determine the surface/interface tension of liquids. It can quickly and accurately test the tension values of various liquid gas surfaces and liquid-liquid interfaces. Widely used in industries such as petroleum, chemical, pharmaceutical, printing, textile, and power. Adopting an electromagnetic force closed-loop force measurement system, single-chip microprocessor control, automatic measurement, easy operation, excellent performance, high precision, high stability, high repeatability, and high linearity of test results.

productcharacteristic:

Compared to other surface tensiometers, the BZY series surface tensiometers include but are not limited to the following advantages:

• Fully automated measurement reduces human error to a low level;
• Automatically read the surface tension balance value;
• One click reset (any value between 0-400mN);
• One click calibration, combined with randomly attached standard weights, accurate and fast;
• The use of platinum plate method provides the possibility for measurement in the following environments:

• Changes in surface tension values at different times due to the presence of surfactants
• Measurement of high viscosity liquids (automatic reading of equilibrium values)
• The interfacial tension value between two immiscible liquids, such as oil and water

• The sensor has sensitive response and high accuracy, which provides the possibility of achieving good reproducibility and providing comparable data.
• Easy to operate, no need for any external computer control;
• The error caused by the machine itself is small, which enables more effective control of various errors during the testing process;
• Sample constant temperature cup, sample temperature detection device, and external constant temperature bath can be selected.

testing mode:Platinum plate method (or platinum ring)

operating mode:Sample table automatic lifting, fully automatic measurement

BZY seriesFully automatic surface tension meterTechnical Parameter：

BZY-1Fully automatic surface/interface tension meterBZY-1 BZY-1Note: √ Optional; X is not optional

application area

The basic function of a tensiometer is to test the surface tension and liquid-liquid interfacial tension of a liquid. Surfactants are widely used in various industries and have functions such as emulsification, solubilization, decontamination, and defoaming. The main application areas of surfactants are introduced as follows:

Standards

Our factory produces fully automatic and automatic meters/The interface tension meter is applicable to the following standards

1. JB/T9388-2002 "Interface Tension Meter Conditions"
2. GB/T6541-86 "Petroleum products - Determination of interfacial tension between oil and water using a circular ring method"
3. ISO1409-1995 "Surface Preparation of Plastic Rubber Polymer Dispersions and Latex for Determination"
4. GB/T22237-2008 "Surface active agents - Determination of surface tension using a surface tension meter"
5. GB11278-89 "Determination of critical micelle concentration of anionic and nonionic surfactants (ring method)"
6. GB/T18396-2001 "Determination of Surface Tension of Natural Latex by Ring Method"
7. SH/T1156-99 "Determination of Surface Tension of Synthetic Rubber"

Standard for Liquid Tension Testing

Surface tension meter/contact angle with standard configuration:

Product Display(Optional accessories and optional devices)

1. Platinum ring
Made of platinum wire with a radius of 0.185mm, with a circumference of 60mm and a ring radius of 9.55mm.
During testing, connecting to a computer can be done throughzConvert large values to tension values (unit: mN/m）。
Made of platinum wire with a radius of 0.3mm, with a circumference of 60mm and a ring radius of 9.55mm.
During testing, connecting to a computer can be done throughzConvert large values to tension values (unit: mN/m）。

2. BZY-1/21 ordinary constant temperature pool
By connecting a silicone tube to a constant temperature bath, samples with a temperature range of 0-60 ℃ can be used for measurement. It can also be combined with BZY-1/23 temperature measuring device to display the temperature value of the measured liquid.

3. BZY-1/22 high and low temperature constant temperature pool
By connecting a silicone tube to a constant temperature bath, samples with a temperature range of -5~110 ℃ can be used for measurement. And BZY-1/23 temperature measuring device can be optionally used in combination to display temperature values.

4. BZY-1/23 temperature measuring device
The sensor composed of PT100 can be inserted into the sample to detect the temperature of the sample in real time. Display range 0~99 ℃, display accuracy 0.1 ℃.

5. When the surface tension test of the tested liquid needs to be carried out under special temperature conditions (extraordinary temperature) of constant temperature, it can be cyclically matched with our factory's super constant temperature bath or low-temperature constant temperature bath to obtain a high-precision and uniform constant temperature field source.

The following figure shows the combination of a tension meter and a constant temperature bath

Third party calibration certificate for tension tester