Battery internal resistance tester-Fornitore globale

1st Floor, Building B, Creative Industry Park, Xinyuan 1st Road, Bishui Tianyuan Avenue, Dalang Town, Dongguan City

Product Introduction>

HK3561 is a high-precision and high stability battery internal resistance tester. Mainly used to measure the internal resistance and voltage of batteries. After the latest upgrade in 2013, the testing accuracy, speed, and stability of the product have been comprehensively improved, reaching the advanced level of similar international products and far ahead of similar domestic products. Test performance fully matches Hioki 3561. The HK3561 comes standard with an RS232C interface and, when paired with DELTA data acquisition software, enables automated measurement to accurately and quickly determine battery degradation. It is suitable for product sorting and factory inspection on battery assembly lines.

High speed and high-precision testing
Resistance 0.3%, voltage 0.05%, fastest 25 times/second
Built in comparator function, saving 30 sets of sorting conditions
Low power testing, maximum testing current<10mA, open circuit voltage<20mV
Support multi-channel scanning testing (optional multi-channel scanning box)
Automated measurement, accurate and rapid judgment, suitable for product sorting and factory inspection on assembly lines.
Application scenarios>>

High precision internal resistance and voltage detection of lithium batteries
Equipped with an automatic sorting machine for automatic testing of battery internal resistance and voltage
Assessment of battery degradation status and lifespan
ESR testing of supercapacitors (low internal resistance capacitors)
Test parameters ＞＞

Maximum input voltage	Rated input voltage:DC±60V Maximum rated voltage to ground:60V
Maximum input voltage
Resistance measurement range	10mΩ(Zui Big Display)3.1000mΩ, Resolution10μΩ）~1KΩRange (maximum display)3100.0Ω, Resolution1Ω），6File switching
measurement accuracy	100mΩ~1000Ωrange± 0.5%rdg. ±2dgt.(Medium speed)MEDIUMTime needs to be added for calculation±2dgt.,fastFASTTime needs to be added for calculation±4dgt.）10mΩ range ±0.5%rdg.±2dgt.（FASTTime needs to be added ±6dgt., MEDIUMTime needs to be added ±4dgt., SLOWTime needs to be added ±1dgt.）
measurement accuracy
Voltage measurement range	DC6V(resolving power0.1mV), DC60V(Resolution)1mV）Switching between two gears
display	impedance(31000),Voltage（±600000）.High brightness, dotsLEDdisplay
Sampling time	FAST：30ms，MEDIUM:80ms，SLOW; 300ms(The above is the fastest time, depending on the testing project and power frequency)
Full measurement time	response time+Sampling time (impedance)/Voltage together approximately10msThe response time is for reference only and depends on the testing process and the object being tested
comparator	Judgment:HI/IN/LO(Voltage and impedance are independently judged one by one)Overall judgment（PASS/FAIL.Impedance judgment results and voltage judgment resultsANDoperation),Interface display, buzzer alarm, externalI/OOutput (optional), maximum load voltage30V， Maximum output current100mA.
External interface	Handle I/O(Optional selection), RS-232C,USB
Power Supply	AC:85-242V，47~63Hz，15VA
Volume and weight	249W×103H×353D mm，3.0kg
enclosure	instructions×1, power cord×1, (optional testing line)