Bending machine, color steel plate hydraulic bending machine, 4-meter hydraulic folding machine, CNC tile machine, Xinyunhui Machinery

Bending machine and shearing machine

Bending machines are divided intoManual bending machineHydraulic bending machine and CNC bending machine. Hydraulic bending machines can be divided into three synchronization modes: torsional axis synchronization, machine hydraulic synchronization, and electro-hydraulic synchronization. Hydraulic bending machines can be divided into upward and downward movements according to their motion modes. This bending machine belongs to the upward hydraulic bending machine.

Bending machine Hydraulic Shearing Machine Usage of Simple Color Plate Folding Equipment
1. Firstly, it isplug inTurn on the key switch on the control panel, then press the oil pump start button, and you will hear the sound of the oil pump turning. (At this time, the machine is not moving)
2. Travel adjustment: When using a bending machine, attention must be paid to adjusting the travel, and a test drive must be conducted before bending. When the upper mold of the bending machine descends to the bottom, there must be a gap of plate thickness. Otherwise, it will cause damage to the mold and machine. The adjustment of the itinerary also includes electric quick adjustment and manual gastric adjustment.
3. When selecting a bending groove, it is generally necessary to choose a groove with a width 8 times the thickness of the board. If bending a 4mm sheet metal, a slot of about 32 should be selected.
4. Rear gear adjustment generally includes electric quick adjustment and manual fine adjustment, using the same method as a shearing machine.
5. Press the foot switch to start bending. Unlike the shearing machine, the bending machine can be released at any time. Once the foot is released, the bending machine stops and continues to move downwards.