VIP member
Bridge type arc angular velocity gate
Bridge type arc angle speed gate is a high-tech product mainly designed for intelligent management of personnel passages. The product is finely proces
Product details
Bridge type arc angle speed gate is a high-tech product mainly designed for intelligent management of personnel passages. The product is finely processed, fully functional, and of high grade, mainly used in high-end residential areas, smart buildings, hotels, subways, docks, clubs and other high-end places. This device organically integrates mechanical, electronic, microprocessor control, and various identity recognition technologies, making it compatible with IC cards, ID cards, barcode cards, fingerprints, and other card reading and recognition devices. By selecting various identity recognition system devices and adopting reliable security protection devices, alarm devices, direction indicators, etc., it coordinates to achieve intelligent control and management of channels.
Technical parameters:
Chassis material: Domestic standard 304 stainless steel (iron plate baked paint)
Product Name: Bridge Arc Swing Brake
Working voltage: AC220 ± 10% V 50 ± 10% HZ
Dimensions: 1200 L * 280 W * 980 H (MM)
Movement:Turbine movement (anti-collision swing brake)
Arm length: up to 380mm outside the chassis
Maximum channel width: 800MM
Working environment: Indoor and outdoor (shade shed) -10 ℃~70 ℃ Relative humidity: ≤ 90%, no condensation
Gate opening and closing time: 0.6 seconds Traffic speed: 40 people/minute (normally open), 25-30 people/minute (normally closed)
Time required to enter traffic mode after power on: 3 seconds
Automatic reset time after malfunction: 10 seconds
Normal service life: 3 million cycles
Input interface: Relay switch signal or 12V level signal or 12V pulse signal with pulse width>100ms, driving current>10mA
Product functions and features:
1. It has fault self checking and alarm prompt functions, making it convenient for users to maintain and use.
2. The operating status of programmable devices can be accessed through the built-in small keypad on the main control board.
3. Mechanical anti pinch and infrared induction anti pinch functions, when encountering resistance during the reset process of the swing arm, the motor automatically stops within the specified time
Reset again after default delay (until reset), with low force (≤ 2Kg).
4. Illegal intrusion, tailgating alarm, reverse intrusion gate automatically closes
5. The anti-collision function automatically locks the swing arm when no opening signal is received.
6. It has an automatic reset function. After the gate is opened, if no pedestrian passes through within the specified time, the system will automatically cancel the pedestrian's passage
Permission: The reset time can be adjusted from 1 second to 60 seconds (the system default time is 10 seconds), and the channel will automatically open after power failure (in accordance with fire safety requirements),
The power on channel automatically closes
7. Infrared sensing reset, infrared sensing anti pinch function (optional 3 or 5 pairs of infrared)
8. It can control personnel entry and exit in one or two directions, with infrared induction channels for entry and exit.
Technical parameters:
Chassis material: Domestic standard 304 stainless steel (iron plate baked paint)
Product Name: Bridge Arc Swing Brake
Working voltage: AC220 ± 10% V 50 ± 10% HZ
Dimensions: 1200 L * 280 W * 980 H (MM)
Movement:Turbine movement (anti-collision swing brake)
Arm length: up to 380mm outside the chassis
Maximum channel width: 800MM
Working environment: Indoor and outdoor (shade shed) -10 ℃~70 ℃ Relative humidity: ≤ 90%, no condensation
Gate opening and closing time: 0.6 seconds Traffic speed: 40 people/minute (normally open), 25-30 people/minute (normally closed)
Time required to enter traffic mode after power on: 3 seconds
Automatic reset time after malfunction: 10 seconds
Normal service life: 3 million cycles
Input interface: Relay switch signal or 12V level signal or 12V pulse signal with pulse width>100ms, driving current>10mA
Product functions and features:
1. It has fault self checking and alarm prompt functions, making it convenient for users to maintain and use.
2. The operating status of programmable devices can be accessed through the built-in small keypad on the main control board.
3. Mechanical anti pinch and infrared induction anti pinch functions, when encountering resistance during the reset process of the swing arm, the motor automatically stops within the specified time
Reset again after default delay (until reset), with low force (≤ 2Kg).
4. Illegal intrusion, tailgating alarm, reverse intrusion gate automatically closes
5. The anti-collision function automatically locks the swing arm when no opening signal is received.
6. It has an automatic reset function. After the gate is opened, if no pedestrian passes through within the specified time, the system will automatically cancel the pedestrian's passage
Permission: The reset time can be adjusted from 1 second to 60 seconds (the system default time is 10 seconds), and the channel will automatically open after power failure (in accordance with fire safety requirements),
The power on channel automatically closes
7. Infrared sensing reset, infrared sensing anti pinch function (optional 3 or 5 pairs of infrared)
8. It can control personnel entry and exit in one or two directions, with infrared induction channels for entry and exit.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-