C-shaped 480 anode plate, dust removal anode plate, anode plate
The anode plate of the electrostatic precipitator is the core component of the electrostatic precipitator. The acceptance criteria for the anode plate are: straight, high strength, strong rigidity, and not easily twisted. After sales scope: deformation within the warranty period. The domestically produced universal standard plates for the anode plate of electrostatic precipitators are C480mm plate and Z-shaped 385mm plate. The company is equipped with three sets of multifunctional anode plate rolling mills and complete molds. It can produce anode plates such as C480, Z385, ZT24, etc. (roll change is sufficient).

The solenoid valve has a sealed chamber with through holes at different positions, each leading to a different oil pipe. The middle of the chamber is the valve, and there are two electromagnets on both sides. The magnetic coil on either side will attract the valve body to the other side. By controlling the movement of the valve body, different oil discharge holes can be blocked or leaked out. The oil inlet hole is normally open, and hydraulic oil will enter different oil discharge pipes. Then, the oil pressure is used to push the piston, which in turn drives the piston rod, which in turn drives the mechanical device to move. By controlling the current of the electromagnet in this way, the mechanical motion is controlled