Dandong Jingyi Environmental Protection Equipment Co., Ltd
Home>Products>CDFM medium-sized dust collector
Product Groups
Firm Information
  • Transaction Level
    VIP member
  • Contact
  • Phone
    13700187587
  • Address
    No. 70 Erlong Road, Fengcheng Industrial Park, Liaoning Province
Contact Now
CDFM medium-sized dust collector
CDFM medium-sized dust collector
Product details
 

Serbia Smederevo Steel Plant


Serbia Smederevo Steel Plant


Tangshan Iron and Steel Medium thick Plate Company


Tangshan Iron and Steel Medium thick Plate Company


Xinjiang Geological Brigade




CDFMLarge and medium-sized pulse bag filter

characteristic

1. The spraying device has low resistance and the pulse valve opens and closes quickly, so the spraying pressure is lower than0.15~0.25MPa.

2. Filter bag length6mmThe land area is relatively small.

3. The filter bag is easy to remove and replace, with short contact between people and dust bags, and good operating conditions.

4. The matching computer controller works reliably and is easy to adjust.

5The large and medium-sized pulse bag filter is a dust removal equipment developed to meet the needs of high air volume. Its characteristics are long filter bags, large quantities, compact equipment, and the ability to handle large amounts of dusty gases.

Working principle

The dusty gas is introduced from the lower part of the middle box, guided by the baffle to the upper part of the middle box and enters the filter bag, while the clean gas is discharged from the upper box. For large and medium-sized enterprises, the design of airflow guiding baffles is crucial. A good baffle can make the flow field inside the dust collector more reasonable, thereby reducing equipment resistance and improving dust removal efficiency.

The connection between the pulse valve and the spray pipe adopts a plug-in method. There are nozzles with varying aperture sizes on the spray pipe, aligned with the center of each filter bag. Design according to standards for each15The strip bags share a pulse valve, and there is no injection Venturi tube at the bag mouth.

To eliminate the phenomenon of dust reattachment after pulse blowing, there is another type of medium-sized pulse bag filter with offline dust cleaning by stopping the air. It divides the upper box into several small chambers, each equipped with a shut-off valve. When the pulse valve of a certain chamber is blown, Close the air stop valve of the room and cut off the dusty airflow, thereby increasing the dust cleaning effect. The duration of each spray is65~85ms,Shorter than traditional small-scale pulse dust cleaning methods50%It can produce a stronger dust cleaning effect. The dust cleaning control adopts a constant pressure difference control method, or can be timed control.



Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!