CHR-3MM round steel nail clipAdopting PE material injection molding, it has high elasticity, impact resistance, and will never break. The product series is plug-in type, with steel nails directly attached to the line card, which can save a lot of time and reduce construction costs. Usage: Place the wire in the card and use a hammer to nail the steel nail to the wall to fix the wire. Purpose: For general indoor wiring and fixing of electrical wires.

Network cable nail, telephone cable nail, wall nail, network cable card, steel nail, wire clip, cable slot, wire clip

Plastic steel nail wire card

Specification: Round 3mm

Quantity: 100 pieces

Explanation: The steel nail clip is made of high-quality steel nails that are sturdy and aesthetically pleasing, suitable for fixing wires in cement and brick walls.

Applicable: Ethernet cables, telephone cables, cable TV cables, etc

·This series of line cards are successfully injected with PE (white, gray) material, which has high elasticity, impact resistance, and will never break.
·This series of line cards are all plug-in type, with steel nails directly attached to the cards, which can save a lot of time and reduce construction costs.

number	tall（mm）	Circular diameter (mm)	Steel Nail	colour
CHR-3MM	3.6	3.0	1.4×15	WHITE GREY BLACK BROWN DARK GREY
CHR-3.5MM	4.2	3.5	1.47×14
CHR-4MM	5.3	4.0	1.7×14
CHR-5MM	6.0	5.0	1.7×14
CHR-6MM	8.0	6.0	1.82×16
CHR-7MM	8.7	7.0	1.82×18
CHR-8MM	9.5	8.0	1.95×19
CHR-9MM	11.0	9.0	2.05×22
CHR-10MM	12.0	10.0	2.1×23
CHR-12MM	13.5	12.0	2.2×25
CHR-14MM	16.5	14.0	2.3×30
CHR-16MM	18.0	16.0	2.35×32
CHR-17MM	20.0	17.0	2.6×38
CHR-18MM	20.5	18.0	2.6×38
CHR-20MM	22.5	20.0	2.7×40
CHR-22MM	23.5	22.0	2.9×43
CHR-25MM	26.5	25.0	3.1×50
CHR-30MM	32.5	30.0	3.5×55
CHR-32MM	34.5	32.0	3.5×55
CHR-35MM	38.0	35.0	3.5×60
CHR-40MM	43.8	40.0	3.5×65
CHR-50MM	54.5	50.0	4.0×78

The altitude shall not exceed 2000 meters, the surrounding air temperature shall not be higher than+40 ℃, not lower than -5 ℃, and the average temperature within 24 hours shall not exceed+35 ℃.
The installation location has clean air, and the relative humidity of the atmosphere should not exceed 50% when the ambient temperature is 40 ℃. The average relative humidity in humid months is 90% when the average temperature is 25 ℃, taking into account the condensation that occurs on the surface of the product due to temperature changes.

Note: In order to facilitate the maintenance and updating of existing electrical equipment for users, a special design has been made to useCHR-3MM round steel nail clipreplace

If you wish to learn moreCHR-3MM round steel nail clipFor details such as product specifications, prices, maintenance and replacement, please contact us.