Adopting a frame structure, high-strength bolt connection, good overall rigidity, and minimal deformation.
This series of crossbeams cannot move, and the workpiece is fed into the feeding mechanism. The worktable is made of carbon tools, and after high-frequency surface quenching, the hardness reaches 55-60HRC (ordinary worktable<30HRC), making the worktable hardness much higher than that of stainless steel. This solves the problem of groove marks caused by low worktable hardness in traditional models, ensuring that the flatness of the worktable is ≤± 0.03mm, completely solving the problem of reduced V-groove accuracy due to worktable deformation, and extending the service life of the equipment.
There are material support devices installed in front and behind the workbench to prevent scratches on the sheet metal during the processing.