CO2 laser engraving machine-Fornitore globale

Tianxiong Laser, 1st Floor, Poly Industrial Park, No. 10 Huiyuan Road, Wangniudun Town, Dongguan City

Introduction to CO2 laser engraving machine equipment

CO2 laser engraving machine is a relatively traditional desktop computer with a relatively large size, but it is more convenient to use. The commonly used laser power for CO2 laser engraving machine includes 30 watts, 60 watts, 100 watts, 150 watts, 300 watts, etc. CO2 laser engraving machine is a gas laser that uses CO2 gas as a medium, abbreviated as CO2 laser. The wavelength of CO2 laser is 10.6um, belonging to the mid infrared band. CO2 gas is charged into the ceramic discharge chamber, and the gas molecules are released into the laser under the high voltage charging state of the electrode. Amplify the released laser energy and generate a laser beam. Automatic marking is achieved by controlling the galvanometer to change the laser beam path through a computer. The core components of the CO2 laser engraving machine are all imported, ensuring long-term trouble free operation of the equipment.

Structural analysis of CO2 laser engraving machine

Parameter table of CO2 laser engraving machine

average output power	30W	60W	100W	150W	300W
wavelength	9.3um/10.64um
Pulse width/Q frequency	Fixed pulse width/1kHz-100KHz
Average power/peak power	30 watts/40 watts	>60 watts/>90 watts	>100 watts/>300 watts	>150 watts/>400 watts	>300 watts/>600 watts
Marking format	110 × 110mm optional (70x70mm 150x150mm 200x200mm 300x300mm) Dynamic focusing format: 300mm * 300mm -1200mm * 1200mm
repeatability	＜200μ
Carving line speed	≤7000mm/s
Cooling method	forced air cooling	water-cooling	water-cooling	water-cooling	water-cooling
Minimum character height	0.2mm		0.04mm
Laser tube type	Imported metal RF tube (inflatable and reusable)
Overall dimensions (L * W * H)	800mm × 680mm × 1200mm (depending on the specific situation)
power supply	AC 220V 50KHz
upgradeable	Electric lifting manual two-dimensional worktable, electric two-dimensional table rotating fixture, red light focusing

Application scope of CO2 laser engraving machine

CO2 laser engraving machine is mainly used for non-metallic materials and some electroplated metal products, such as bamboo products, wood, acrylic, leather, glass, marble, ceramics, rubber, silicone, paper, plastic, etc. Widely used in industries such as pharmaceutical packaging, food packaging, beverage packaging, plastics, textiles, leather, wood, handicrafts, electronic components, communications, clocks, glasses, printing, etc. Suitable for marking, carving, hollowing out, and cutting products made of various non-metallic materials. Various types of text, symbols, graphics, images, barcodes, serial numbers, QR codes, etc. can be marked and engraved.

Precautions for using CO2 laser engraving machine

When using a CO2 laser engraving machine, it is strictly prohibited to look up from below the laser galvanometer, as this may cause permanent damage to the eyes due to the laser beam entering.
When the CO2 laser engraving machine is working, it is important not to suddenly turn off the power, as this may cause the laser software to be lost or even the computer to fail to open properly. The hardware of the machine may also be damaged. It is recommended to equip it with a PUS power stabilizer.
3. Do not frequently move the position of the carbon dioxide CO2 laser marking machine, as the optical components inside the machine have been adjusted for position and angle when leaving the factory. Frequent movement of the position can cause the internal components to change angle due to vibration, making the machine unusable.
When it is not applicable for a long time, the main power supply needs to be disconnected.
5. Do not browse high-risk websites on the computer of the CO2 laser marking machine to prevent laser engraving with garbled characters after being infected with viruses.
6. Machine equipment needs to be effectively grounded. Some customers' power sockets do not have grounding wires, which can cause static electricity and users may frequently come into contact with static electricity.
7. Do not place your hands within the working range of the CO2 laser engraving machine, as the 10.64um wavelength laser beam of the CO2 laser engraving machine can burn your hands. If it hits your hands within the focal length range, it will directly break the skin and flesh, so be careful.

CO2 laser engraving machine after-sales service

Delivery list for CO2 laser engraving machine: delivery note, metal adjustment plate, tool set, training service list;
After sales and service of CO2 laser engraving machine: home delivery, technical engineers on-site installation, debugging and training, lifelong technical support, lifelong software free upgrade, 2-hour response after sales, on-site processing within 24 hours, after-sales telephone: 400-829-662