1. The insulation level of the Shengbang vertical gear reduction motor is Class F, and the applicable voltages are three-phase 380V/220V/230V/240V/400V/415V/440V-50HZ, three-phase 220V/240V/380V/415V/440V/460V/480V/600V/-60HZ, single-phase 110V/115V/200V/220V/230V-50HZ, and single-phase 110V/220V/240V-60HZ.

2. The Taiwan Shengbang vertical 200W reduction motor is suitable for motor pole numbers including three-phase two-stage motor, three-phase four stage motor, three-phase six stage motor, three-phase eight stage motor, and single-phase four stage motor.

3. Shengbang gear reduction motor is suitable for temperatures ranging from -10 degrees Celsius to 40 degrees Celsius, with humidity below 90%. It is suitable for altitudes below 1000 meters. In special areas and weather conditions, antifreeze oil can be added or waterproof motors can be customized.

CPG Shengbang Gear Reduction Motor Vertical 200W Motornoumenon:

CV-2, CV-3, and CV-4 reducers have output shaft diameters of 22mm, 28mm, and 32mm, respectively;

The CV-2 and CV-3 gearbox bodies are both made of aluminum alloy ADC-12, while the CV-4 gearbox body is made of cast iron FC-20. The motor uses a standard fully enclosed special aluminum shell motor;

If the environment in which the reducer equipment is used contains certain corrosive gases, CV400-ST and CV400-AT Shengbang iron shell reducers can be selected.

CPG gear reduction motorvertical200W gear:

The gears of the gear reducer are all precision hobbing processed, with a gear machining accuracy level of 2-3;

The gear material of Shengbang reducer is S45C, quenched and tempered to HRC21 degrees, and then subjected to high-frequency heat treatment to HRC45-48 degrees.

Shengbang gear reduction motor vertical 200W gear shaft:

The internal gear shaft of Shengbang gear reduction motor is precision hobbing processed by SKIVING, with a gear accuracy level of 1-2;

The gear shaft material of Shengbang gear reducer is SCM21, quenched and tempered to HRC21 degrees, and then subjected to carburizing heat treatment to HRC58-61 degrees;

The internal gear shaft material of Shengbang Motor is SCM4 quenched and tempered to HRC21 degrees, and then subjected to high-frequency treatment to 50-53 degrees.

Bearings and oil seals for vertical 200W CPG gear reduction motor:

The bearings of CPG reducer are made of Swedish SKF or precision bearings of the same grade to ensure long-term operation life;

The CPG motor shaft side is mainly equipped with high-temperature resistant VITON oil seals, which can ensure the prevention of lubricating oil leakage inside the motor.

Shengbang gear reduction motor vertical 200W protection function:

The junction box of Shengbang Motor adopts an aluminum alloy dedicated IP-55 aluminum junction box, which has excellent waterproof and dustproof properties;

The back cover of Shengbang Motor adopts a waterproof motor back cover, and an oil seal is added at the axis to prevent dust and external moisture from entering the motor.

Characteristics of the vertical 200W motor of Shengbang gear reducer:

Three phase motor: using standard fully enclosed specialized aluminum shell motor, with extremely high operating efficiency and excellent heat dissipation performance of the gearbox body;

Single phase motor: using a standard semi dense special iron shell motor with an iron junction box, it has high operating efficiency and is easy to dissipate heat.