Carbolite HRF air circulation oven

1、 Product Introduction:

The Carbolite 750 ° C HRF air circulation furnace is divided into desktop and floor standing types.

Equipped with powerful fans and horizontal air guidance, the furnace and samples heat up quickly, ensuring high temperature uniformity.

This series of air circulation furnaces is often customized for users, such as non-standard sizes or specific control systems. HRF is also often customized as an air circulation furnace that meets Nadcap AMS2750F standards.

2、 Standard parameters:

1. Maximum operating temperature 750 ° C

2. Capacity of 22, 45, 112 or 324 L

3. The heating elements are located on both sides of the furnace

4. Stainless steel inner liner

5. The insulation material adopts lightweight refractory bricks with low heat storage capacity

6. Programmable EPC3016P1 Controller

3、 Optional accessories:

1. A series of precision digital controllers with digital communication options, multi-stage programmers and data recorders, as well as digital communication interfaces

2. Over temperature protection (recommended for protecting valuable samples or unattended operations)

3. Additional layer boards and brackets

4、 Technical parameters:

5、 Attention:

1. The external dimensions are measured when closing the furnace door, including the chimney dimensions

2. The heating rate is measured under no-load operation with the temperature set at 100 ° C below the maximum temperature

3. HRF 7/22 and HRF7/45 have three built-in layer board brackets

4. The maximum power and heating time are both based on a 240V power supply