Carbolite HTRV High Temperature Vertical Tube Furnace

1、 Product Introduction:

Carbolite HTRV high-temperature tube furnace can be used vertically, with a maximum temperature of 1800 ℃.

High grade insulation materials are composed of vacuum formed fiberboard, which has a low thermal conductivity to ensure low energy consumption and fast heating speed. The insulation layer and silicon molybdenum rod heating element are placed inside a rectangular shell, and the heating element is installed vertically, making replacement simple and convenient. At high temperatures, the heating element reacts with oxygen to form a silicon dioxide protective layer on the surface, which protects the heating element from further thermal shock and chemical corrosion.

With a variety of accessories, the HTRV series high-temperature tube furnace can provide a complete system solution for applications in the high temperature range.

The standard vertical furnace does not include a bracket, and users can integrate the furnace into their own equipment. An additional L-shaped bracket can also be selected to support the furnace body.

2、 Application example:

Annealing, pyrolysis, sublimation, synthesis, tempering, drying, rapid prototyping, crystal growth, quenching, sintering, carbonization, degassing, degreasing, metal injection molding (MIM)

3、 Standard parameters:

1. Maximum temperature 1800 ℃

2. Programmable EPC3016P1 Controller

3. Over temperature protection

4. Suitable for vertical use

5. The maximum outer diameter of the working pipe under controllable atmosphere environment is 100mm

6. The maximum outer diameter of the working pipe under atmospheric conditions is 200mm

7. Heating length of 100, 250 or 500mm

8. High quality B-type thermocouple

9. Ceramic fiber insulation material with low heat storage capacity

10. Vertical suspension, high-quality MoSi2 heating element

11. The slit on the rectangular shell is used for convective cooling

12. The furnace body is separated from the control cabinet, with a 3-meter cable, plug, and socket between them

13. Ethernet communication interface

4、 Optional accessories:

1. A series of precision digital controllers with digital communication options, multi-stage programmers and data recorders, as well as digital communication interfaces

2. Work pipes of various sizes and materials

3. Thermal insulation plugs and radiation shielding plugs prevent heat loss and improve temperature uniformity

4. More information on controllable atmosphere and vacuum components

5. The vacuum system can be equipped with either a mechanical pump or a turbo molecular pump, with a working tube inner diameter of 60mm or more

6. L-shaped bracket, easy to use

7. Oxygen probe for inert gas supply system

8. Manual and automatic gas supply systems, up to 3 gas channels can be configured

9. The cable between the furnace body and the control cabinet is 6m long

10. Laboratory gas safety system, capable of supplying hydrogen gas above 750 ° C

5、 Technical parameters:

6、 Attention:

1. When using ceramic working tubes, the heating rate should not exceed 5 ℃/minute

2. The depth of the control cabinet needs to reserve a distance of about 150mm for electrical plugs and sockets

3. 220-240V is a single-phase power supply, 380-415V is a three-phase power supply

4. The length of the uniform temperature zone of the horizontal tube furnace is measured when it is 100 ° C below the maximum temperature and shielded plugs are installed at both ends

5. The maximum continuous use temperature should be 100 ℃ lower than the maximum temperature

6. Power supply: A=1 phase (16A)+N/B=3 phases (16A)+N/C=3 phases (32A)+N/D=3 phases (63A)+N