VIP member
Charging pile cable bending testing machine
Simulate the bending and twisting of the charging station connector during actual use, and detect it at the standard required speed and angle; Suitabl
Product details
1、 Function Overview:
Simulate the bending and twisting of the charging station connector during actual use, and detect it at the standard required speed and angle; Suitable for manufacturers and quality inspection departments of charging stations to conduct bending connection part tests on the "mechanical strength" of power connection cables for charging vehicle plugs and sockets.
2、 Corresponding standards:
Requirement for clause 7.15 "Mechanical Strength" in GB/T 20234.1-2015 standard;
3、 Technical requirements:
1) Swing speed and angle adjustable;
2) Load detection based on the rated current and voltage of the charging pile connector
3) The equipment has a certificate of first measurement or calibration qualification;
4、 Technical parameters:
1) Adjustable swing speed: 0-60 times/minute, adjustable swing angle: 0-180 °;
2) Suitable for connectors with a cross-sectional area of 240mm ²;
3) The equipment includes power supplies and loads (cabinets) for testing purposes; Power supply and load (cabinet) capacity: voltage 0-450V, voltage accuracy ± 2%, current 0-35A, accuracy ± 2%; Carrying six sets of loads;
4) 6 sets of workstation fixtures, 6 pieces of 20N and 25N weights each;
5)Dimensions: Approximately 800 * 500 * 1700mm;
6)Weight: Approximately 320Kg;
7)Power supply voltage: AC220V ± 5%, 50Hz10A;
Simulate the bending and twisting of the charging station connector during actual use, and detect it at the standard required speed and angle; Suitable for manufacturers and quality inspection departments of charging stations to conduct bending connection part tests on the "mechanical strength" of power connection cables for charging vehicle plugs and sockets.
2、 Corresponding standards:
Requirement for clause 7.15 "Mechanical Strength" in GB/T 20234.1-2015 standard;
3、 Technical requirements:
1) Swing speed and angle adjustable;
2) Load detection based on the rated current and voltage of the charging pile connector
3) The equipment has a certificate of first measurement or calibration qualification;
4、 Technical parameters:
1) Adjustable swing speed: 0-60 times/minute, adjustable swing angle: 0-180 °;
2) Suitable for connectors with a cross-sectional area of 240mm ²;
3) The equipment includes power supplies and loads (cabinets) for testing purposes; Power supply and load (cabinet) capacity: voltage 0-450V, voltage accuracy ± 2%, current 0-35A, accuracy ± 2%; Carrying six sets of loads;
4) 6 sets of workstation fixtures, 6 pieces of 20N and 25N weights each;
5)Dimensions: Approximately 800 * 500 * 1700mm;
6)Weight: Approximately 320Kg;
7)Power supply voltage: AC220V ± 5%, 50Hz10A;
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-