Brief Introduction to Chroma 19073 Voltage Tester

This automated withstand voltage/insulation testing instrument is a high-quality device designed for automatic withstand voltage leakage current and insulation resistance testing of motors and electronic equipment.

In terms of voltage withstand testing, the output power of this instrument is AC: 100VA (5kV, 20mA), DC: 30VA (6kV, 5mA), so it can be used for voltage withstand or insulation testing of electronic, motor and other equipment, and can also be used for the same testing of component products.

In terms of insulation resistance testing, the range that this instrument can test is 0.1M Ω~50G Ω, and the test voltage can be set arbitrarily from 0.050kV~1kV.

In terms of ground continuity testing, the range that this instrument can test is 0 Ω to 5 Ω.

In terms of short open circuit detection testing, this tester first tests whether the capacitor is short circuited or open circuited before conducting high voltage testing to ensure good contact with the tested object before conducting high voltage testing.

This instrument adopts a clear display method, and all setting states, time, current, voltage, resistance values, etc. can be seen on the display without the need to memorize any set project parameter states.

This instrument is equipped with a device for determining good and defective products, as well as a remote control device for testing results.

This instrument can perform efficient and accurate testing on motors, electronic devices, or components.

Chroma 19073 Front Panel Diagram

Chroma 19073 Rear Panel Diagram

　　
(1) Remote control terminal

(2) VOLTAGE SELECTOR: Input power range switch

(3) AC LINE: AC power socket and fuse holder

(4) Earth Ground Terminal: Terminal for Safety Grounding

(5) Continuity CHECK: Ground conduction measurement and current output terminal

(6) FAN: Fan

(7) Expansion function slot

(8) High voltage output terminal: HV OUTPUT

(9) Common testing end: RET/LOW

Chroma 19073 Voltage Tester Product Features

The smallest comprehensive pressure tester in terms of volume

Three in one model for AC/DC withstand voltage and insulation resistance testing (19073)

■ Open/Short Circuit Detection Function (OSC)

Electrical Flashover Detection Function

■ Equipped with 0.4ms rapid cut-off and 0.2sec rapid discharge

Provide reliable and stable test results

Can memorize 10 test steps and 60 sets of memory functions

■ Human body protection function (GFI)