Cold rolled steel plate baking paint sampling vehicleAlso known as steel plate baking paint sampling vehicle, also known as sampling vehicleClean sampling vehiclePurification sampling vehicle, ultra clean sampling vehicle, and clean sampling vehicle.
Cold rolled steel plate baking paint sampling vehicle is a vertical unidirectional flow local air purification equipment. Cold rolled steel plate baking paint sampling vehicle environmental airPrimary FilterFiltering, pressed into the static pressure box by a fan, and then uniformly blown out from the air outlet surface after being filtered by an efficient filter, forming a clean and movable space.

The cold-rolled steel plate baking paint sampling vehicle adopts a fan control system with adjustable air volume, which keeps the wind speed in the clean working area within a certain range, effectively extending the service life of the high-efficiency filter, the main component of the sampling vehicle.

Cold rolled steel plate baking paint sampling vehicleIt is a portable purification device that provides a local cleanliness working environment and has strong universality. The sampling vehicle can be widely used in various industrial sectors and scientific experimental sites such as electronics, national defense, precision instruments, meters, pharmaceuticals, medical and health care, microbiology, agricultural seed cultivation research, food processing, etc. It has a good effect on improving process conditions, enhancing product quality and yield.

Cold rolled steel plate baking paint sampling vehicle grade: Grade 100 @ ≥ 0.5um (US Federal 209E);

Cold rolled steel plate baking paint sampling car colony count: 0.5 per dish at 61 hours (cultivation with a diameter of 90 mm);

The average wind speed of the cold-rolled steel plate baking paint sampling vehicle is adjustable from 0.3-0.6m/s;

Cold rolled steel plate baking paint sampling vehicle noise: ≤ 58dB (A) ≤ 60dB (A)

Cold rolled steel plate baking paint sampling car vibration half peak value: ≤ 3um

Cold rolled steel plate baking paint sampling vehicle illumination: ≥ 300Lx

Cold rolled steel plate baking paint sampling body structure: main structure; Steel plate baking paint

Cold rolled steel plate baking paint sampling car side wall structure; PVC transparent strip curtain

Electrical structure of cold-rolled steel plate baking paint sampling vehicle: power socket current; 5A

Cold rolled steel plate baking paint sampling vehicle power/voltage: AC220V/50Hz

Cold rolled steel plate baking paint sampling car maximum power: 0.22Kw (0.22Kw)

Cold rolled steel plate baking paint sampling car working area size: 900 × 650 × 1350mm (1200 × 650 × 1350mm)

Cold rolled steel plate baking paint sampling vehicle device external dimensions: 1060 × 750 × 1750mm (1360 × 750 × 1750mm)
The main components such as the fan used in this sampling vehicle comply with the requirements of GB1497-87 (Safety Standard for Electric Motors). The structure is composed of steel plates painted or sprayed with paint.

Cold rolled steel plate baking paint sampling vehicle usage method:
1. Move the clean sampling vehicle to the location where sampling is required and fix the sampling vehicle (brake); Connect the power, turn on the power switch, and turn on the fan switch;
2. The fan starts working, adjust the voltage to an appropriate level (usually 220V), wait for the clean sampling vehicle to run for 15 minutes, and then put it into the sampling bucket;
3. After the sampling is completed, remove the sampling bucket, turn off the fan and power, unplug the power cord, and move the sampling vehicle to its original position.

Steel plate baking paint sampling vehicleAdopting a vertical laminar airflow form. The variable speed centrifugal fan presses the air filtered by a pre filter in the negative pressure box into the static pressure box, and then passes it through a high-efficiency filter for secondary filtrationHigh efficiency filterThe clean airflow blown out from the air outlet passes through the working area with a certain uniform cross-sectional wind speed, carrying away dust particles and biological particles, thus forming a dust-free and sterile working environment.
Structural characteristics of steel plate baking paint sampling vehicle:

Cold rolled steel plate baking paint sampling vehicleThe upper half is the air supply static pressure box, the lower half is the clean area, and the box body is made of steel plate baked paint.
The air supply body is equipped with a filter made of ultra-fine glass fiber filter material, a multi wing forward low-noise variable speed centrifugal fan, and lighting fluorescent lamps and ultraviolet sterilization lamps installed on the air outlet diffuser plate. In order to facilitate the work and observation of the staff, the baffles on both sides of the operating surface in the clean work area are made of transparent glass, and the front and rear windshields are made of transparent and environmentally friendly plastic materials.

Sampling vehicle installation confirmation:
Appearance: The paint surface should be smooth and flat, with no peeling or detachment of the coating. The decorative curtain should be smooth, vertical, and free of damage. Inspection method: Visual inspection.
Check whether the unpacking inspection meets the requirements and establish a complete equipment file.
Check if the SOP for the use of the equipment has been drafted and if appropriate training has been provided to the users.

Sampling vehicle operation confirmation:
Wheels: flexible and reliable. Inspection method: Visual inspection and manual testing.
Illuminance: The illuminance at each point shall not be less than 300Lx. Inspection method: The illuminance at a height of 60cm from the ground shall be measured by an illuminance meter at three points, with three measurements taken at each point.

Purification efficiency of sampling vehicle:
Dust particle count: The number of particles larger than 5.0 μ m is less than 20000/m3, and the number of particles larger than 0.5 μ m is less than 3500000/m3. Inspection method: Adjust the wind speed to low, medium, and high levels, and test with a dust particle counter at a height of 80cm-100cm from the ground. Measure three points per level, and measure three times at each point.
Settling bacteria: ≤ 10 settling bacteria, measured at three points, each point measured three times.
Pressure difference: The pressure difference between the inside and outside of the vehicle is greater than 10Pa. Inspection method: Use a micro differential pressure gauge to measure the pressure difference at three points, with three measurements taken at each point.

Requirements for after-sales service time of purification equipment:
Whether it is paid after-sales service or free after-sales service, customers provide feedback on equipment after-sales issues to Zijing. After our company provides a solution and the customer confirms the solution:
1. Arrive at the site within 24 hours within the Pearl River Delta and Yangtze River Delta to solve after-sales service problems;
2. In other areas, it is generally within 48 hours to arrive on-site to solve after-sales service problems, while in special remote areas, it is up to 96 hours to arrive on-site to solve after-sales service problems.
Original source: Guangzhou Zijing http://www.zj-filter.com/ Li Gong (139-2875-8616)