VIP member
Colloidal solid content tester
Applicable industries: widely used in various industries, such as plastic, grain, feed, tobacco, paper making, food (dehydrated vegetables, meat, nood
Product details
Applications：
It is widely used in various industries, such as plastic, grain, feed, tobacco, paper making, food (dehydrated vegetables, meat, noodles, flour, biscuits, pie, aquatic processing), tea, beverage, grain, chemical raw materials, pharmaceutical, textile raw materials, etc., to test the free water content of samples
Compared with the international oven heating method, halogen heating can uniformly and quickly dry the sample at high temperatures, and the surface of the sample is not easily damaged. Its detection results have good consistency with the national standard oven method, are replaceable, and the detection efficiency is much higher than that of the oven method. Generally, the sample can be measured in just a few minutes.
-
Model: YD-10S Measurement range: 0.001-120g Range of moisture content determination： 0.01%－100% Determination range of solid content 100%－0.01% Readability of moisture content: 0.01% Heating temperature： 40－200℃ show contents： Moisture content, solid content, time, temperature, weight Display mode: Equipped with backlight sourceLCDLCD display screen Load cell： Imported sensors from Germany to ensure measurement accuracy temperature sensor high-precisionPT100Platinum thermistor Using power supply: voltage220v±10%frequency50HZ±1HZ Weighing tray size: diameter90mm Ambient Temperature： 5℃－35℃ is optimal
-
-
Product advantages;
1. Visual operation can clearly observe the changes of the product under high temperature;
2. Zero consumables, replacing the expensive consumables (sample tray) cost of traditional moisture meters in the later stage
3. Adopting electromagnetic balance force weighing sensors imported from Germany, with high accuracy, long service life, and stable performance;
4. The heating method of halogen ring lamp can directly heat the material from the inside, while heating the edges and middle of the material evenly;
5. Double layered glass design creates a balanced cycle and real-time monitoring of moisture loss, resulting in more accurate results;
6. After the fully automatic measurement is completed, an alarm reminder will be given, and the measurement process does not require supervision;
7. Real time curve display, visually observing changes in moisture content;
8. Advanced humidity control system to avoid interference caused by free moisture;
9. The moisture and solid content of the sample can be converted and displayed simultaneously;
10. The heating chamber adopts a pure stainless steel chamber cover, which is heat-resistant and easy to clean;
11. Communication interface: RS232 interface, can be connected to a printer;
Accessories List;
① One moisture tester mainframe, one windproof disk, one sample disk bracket, one sample disk bracket, two sample disks (stainless steel), six weights, one instruction manual, one product certificate, and one power transformer
-
water contentThe testing of the instrument involves the following steps:
-
1Set heating method
2Set the heating temperature
3Set shutdown mode (shutdown time, automatic shutdown weight loss rate)
4Prepare test samples
4.1 Place the empty sample tray on the tray holder,
4.2 press【tare】Remove the weight of the sample tray
4.3 Take out the sample tray and put in the sample, preferably larger than0.5g
4.4Uniformly distribute the sampledistributionOn the sample tray
4.5 Return the sample tray containing the samples to the rack, and the display screen will show the weight of the samples
5. Close the heating chamber
6. press【Start key】Start Measurement
7. The display screen shows the current weight value, press【Unit conversion key】Convert the current measurement results
8. The measurement is completed, and the display screen shows the final moisture content of the sample. Press【tare】Return to normal weighing mode
9. press【Print key】Send the current measurement results to a printer or other peripheral device.
Attention: You can press at any time during the testing process【stop key】termination
- One year free warranty, lifetime maintenance;
- 7-day no reason return and exchange, 24-hour instant response;
- One on one technical guidance, allowing you to have no worries after purchasing;
- National free consultation hotline: 18659285958.
-
| Data Download | Update Date |
 Colloidal solid content tester
|
2015-08-20 |
| Instruction manual download | Update Date |
|
Colloidal solid content tester
|
2015-08-20 |
| Color page download | Update Date |
|
Colloidal solid content tester
|
2015-08-20 |
-
-
Option 1: Customer ------->Business Manager ------->Contract Signing ------->Payment on Delivery ------->Corporate Transfer ------->Warehouse Shipment ------->Confirm Receipt ------->Our Company Invoices
Option 2: Customer ------->Business Manager ------->Contract Signing ------->Cash on Delivery ------->Warehouse Shipment ------->Express Collection ------->Confirm Receipt ------->Our Company Invoices
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-