HH-60 constant temperature water bath and sinksummary:

Thermostatic water tanks are widely used for drying, concentrating, distilling, impregnating chemical reagents, impregnating drugs and biological products. They can also be used for constant temperature heating of water tanks and other temperature tests. They are the * tool for biological, genetic, viral, aquatic, environmental protection, pharmaceutical, health, biochemical laboratories, analysis rooms, education and scientific research.

HH-60 constant temperature water bath and sinkMain features:

(1) The studio water tank is made of stainless steel, which has superior corrosion resistance.

(2) Accurate temperature control, digital display, automatic temperature control.

(3) Easy to operate and safe to use.

HH-60Technical Parameter

Type: Water tank, digital automatic temperature control

Temperature range: Room temperature to 100 ℃

Temperature control: adjustable within the range of room temperature to 100 ℃

Maximum error: ± 1 ℃

Water temperature fluctuation: ＜ 0.5℃

Heating rate: from room temperature to 100 ℃, not exceeding 1 hour

Power: 1.5KW

Studio capacity: 600 × 300 × 160420×180×150

Power supply: AC 220V 20Hz

HH-60Operating instructions

When using, first inject water into two-thirds of the built-in waterproof board of the water tank, turn on the power, set the power switch to ON, and the displayed value on the upper row is the current water temperature. Press ↖↘/ SET key, the upper row displays SU. Press the<key in sequence, and the ten digit, one digit, and ten digit numbers will flash respectively. Press the ∧ or ∨ key to display the desired set temperature in the lower row, and then press the SET key to enter the working state. After using the instrument, please turn off the power switch and remove the power plug.

HH-60precautions

1. If the water tank is not used for a long time, the water in the workshop water tank should be drained, wiped clean with a soft cloth, and dried.

2. Do not use heaters when the water tank is empty.