Product Introduction:

The template crusher has been continuously innovated and improved by our company for many years, from stable feeding and initial interruption of the feeding system, to the improvement of the hydraulic shock absorption system, to the more reasonable structure of the crushing disc, and the discharge magnetic separation for iron removal. The equipment itself can crush steel bars, iron nails, and steel plates with a diameter of less than Φ 10mm and less than δ 3mm, eliminating the time-consuming and laborious manual selection. The discharge magnetic separation device uses strong permanent magnets for iron removal, with no power consumption and clean iron removal. It can directly enter the next process, avoiding damage to subsequent equipment caused by impurities such as iron nails in the material.

Scope of application:
The finished material crushed by the template crusher is about the size of a matchstick. Due to the large size of the raw material, thick mesh screens are used, and the mesh holes can only process a diameter of 22 millimeters. Therefore, the size of the processed finished material can be adjusted, which belongs to coarse crushing. The hourly output is about 7-9 tons. If you want to crush sawdust like or even finer, you need to use a multifunctional sawdust crusher with a small aperture mesh screen and matching use. This equipment is widely used in waste template processing plants, bamboo plywood processing plants, artificial board plants, composite board plants, power plant boiler raw material combustion, as well as paper mill wood processing plants.

Advantages and Characteristics:
1. The template crusher uses special blades with a hardness of not less than HRC55 (the HRC hardness of the file is 51 degrees)
2. Strong structure, densely packed reinforced plates to ensure the strong reinforcement of the box body
3. Automated button control, convenient, high output, low noise
4. The construction template crusher can be equipped with a conveyor belt for feeding.

working principle:

The construction template crusher, also known as the nail removal wood crusher, is currently a key product developed by the company. Building templates refer to wooden boards, bamboo targets, nailed boards, packaging frames such as bamboo plywood, shelves, brackets, and pallets used on construction sites. The new type of construction template crusher mainly consists of a working platform, a feeding roller, and a conveyor; Feed conveying: Place the wood to be crushed into boards; Feeding pressure roller: controls the feeding speed and keeps the sheet metal from slipping or not feeding; Spiral crushing roller: Welding cutters are evenly distributed along the circumference of the roller to ensure that the crushing roller is constantly subjected to consistent force in the circumferential direction; Plate crushing has the synchronization of feeding and crushing, achieving uniform crushing; The feeding pressure roller adopts UCK series bearings and spring compression mechanism, which can adapt to the crushing of different plate thicknesses; The feeding pressure roller and crushing roller adopt different power systems, which are easy to control.

Technical parameters: