Product Introduction:

Corn green storage machine is a green machinery used for ensiling processing, which can harvest and crush materials, and also harvest the particle size of silage feed according to the needs of the materials. At present, animal husbandry often adopts a green feed processing method, which has a relatively long storage time after processing and can maintain the feed supply for livestock throughout the winter.

　　Working principle of corn green storage machine:

The corn green storage machine is powered by an electric motor (diesel engine or wheeled tractor), which transmits power to the main shaft. The gear at the other end of the main shaft transmits the power through speed regulation to the pressing roller through a gearbox, universal joint, chain, etc. When the material to be processed enters between the upper and lower pressing rollers through the conveyor belt, it is clamped by the pressing roller and sent to the cutting structure at a certain speed for shredding. After shredding, it is thrown out of the machine through the grass outlet by a high-speed rotating blade.

　　The operation of corn green storage machine:

High speed rotating blade Y-shaped vertical impact straw, at the same time, due to the high-speed rotation (flail), the straw is sucked into the casing under the action of inlet pressure, and meets with the fixed gear to cut the casing. Then, a cross-section is generated on the inner wall of the casing through a broken line. Due to the change in wind speed, the straw is repeatedly hit and sent to the cylinder. The cylinder that mixes the straw is transported to the right end of the fan, and the centrifugal force of the fan blades rotates at high speed under the throwing of straw. Throw away the straw collected by the collection truck.

When the corn silage machine harvests corn stalks, they can be crushed and stored as green feed, and can also be used as organic fertilizer for crop crushing. The reason why corn silage harvesters can be promoted in the north is that it is very cold in winter, and livestock basically do not eat green feed in winter, but only feed with feed and hay, resulting in slower growth of livestock. After using the corn silage machine, the silage corn stalks are crushed after the harvested corn residues to obtain good green feed. The green feed obtained by crushing crop straw such as corn stalks has its own unique characteristics in animal feed, because after ensiling processing, water and sugar are also produced through the fermentation of lactic acid bacteria, which is beneficial for livestock absorption and makes meat production more delicious.

　　Advantages of using a green storage machine:

1. The front wheels are equipped with wheel side reducers, which have good sealing performance and will not wear out due to wind and sand. Stronger passability. Suitable for complex road surfaces.

2. Simple and compact structure, lightweight transmission, power saving, small turning radius, suitable for harvesting different sizes of land

3. Equipped with 20 sets of herringbone cutter rollers, the clearance between the moving and fixed blades is ensured, thereby ensuring consistent cutting and the quality of the chopped sections; All axles undergo dynamic balancing treatment to reduce vibration and extend the service life of bearings.

4. Equipped with reinforced wear-resistant blade secondary fans to increase the fan's conveying capacity, it can provide better conveying air volume for dry and light materials or wet and heavy materials, and prevent blockage;

5. Adopting a roller type grain crusher to ensure the quality of materials, the grain crushing rate reaches over 95%, meeting the feed standards of large-scale pastures; (Optional)

6. Equipped with a large grass box for easy recycling and harvesting on the ground; The projectile barrel moves in multiple sections, making it convenient to operate the grass box and collect on board;

7. Equipped with Weichai 210-270 horsepower engine, it has low fuel consumption and strong power;

8. The machine is equipped with a rotary cutting table, with a feeding inlet width of 600mm. The cutting table, pressure roller, and drum are all connected quickly for easy maintenance; Gear driven cutting platform saves power and is less prone to grass entanglement.

9. Optional Eaton (imported from the United States) static hydraulic drive for more flexible operation and higher efficiency; (Optional)

10. Optional 8-inch LCD screen, using dual-mode positioning of Beidou and GPS satellites, for real-time remote monitoring of the machine; The accuracy of equipment acre calculation is as high as 98%; Calculate acres while working, without the need for manual operation, improving work efficiency. Three cameras enable reverse imaging, blind spot imaging, and monitoring of grain storage; (Optional)

11. This machine can be equipped with a front rolling cutter cutting platform, which can collect the entire plant when it is lying down.

12. Optional four-wheel drive, stable handling performance, and strong passability.

13. Configure one key oil injection for the entire vehicle, saving time and effort. (Optional)

14. Equipped with electronic control and button based operation, convenient for the driver to operate. (Optional)

15. Configure anti spitting function, which can cause blockage due to sudden increase in feeding volume, without the need for manual material extraction, with one click automatic anti spitting. (Optional)

　　Please note:The green storage machines produced by enterprises all have a warranty certificate, which includes instructions on warranty maintenance and a warranty maintenance record form; Please specify the deadline for warranty repair and the contact address, phone number, etc. of the warranty repair unit. A comprehensive three guarantee service is an effective guarantee for product use, which can relieve users' worries.

　　Application of Corn Green Storage Machine:

The corn green storage machine can cut dry and wet corn stalks, straw, wheat straw, cotton stalks, soybean stalks, tree branches with a diameter of less than 3 centimeters, bark, bamboo, sugarcane and other materials into small materials at once. These small materials can be used in breeding farms (such as cattle, sheep, donkeys, horses and other herbivores), incineration of raw materials for biological power plants, production of biogas from biogas digesters, pulp making materials for paper mills, straw compaction materials, machine-made charcoal materials, artificial boards and other purposes.

　　Green storage machine