Pump head model	DG-JBT-A/DG-JBT-B/DG-JBT-C
Hose model	1×1	2×1	3×1
inside diameterWall thickness	1×1	2×1	3×1
Reference traffic	0-9	0-27	0-33.9
pay attention to	The flow data in the above table was measured using clean water at room temperature in Jieheng Laboratory and is for reference only 2. The material of the hose, the tolerance of the hose size, the viscosity of the conveying medium, the suction and head can all affect the flow rate 3. When transporting different liquids, the compatibility between the liquid and the hose needs to be considered. Please refer to:Chemical Compatibility Table 4. The lifespan requirements for hoses vary depending on the application scenario. Please refer to:Hose life table

◆ Multi channel micro flow peristaltic pump driven by stepper motor
Users can bring their own drivers or choose JBT-B or JBT-C driver boards as an option
◆ Two installation methods, either panel installation or bottom installation
Medical devices: infusion and cooling pumps, flushing, drainage, etc
Analysis and testing: Gas and liquid sampling, dispensing, titration

DG/JBT Non driven type
DG/JBT-B Standard B-type driver board
DG/JBT-C Optional C-type driver board
speed range	0.1～150rpm
Speed Control	Users can provide their own drivers or choose to use them as an optionJBT-B（JBT-CThe driver board is equipped with a non-standard configuration with display and accepts membrane switch control
Installation method	Can be panel mounted or bottom mounted
Card tube specifications	ф1.02×δ0.86 ф2.79×δ0.86
Flow range	0-33.9ml/min
MOTOR	45W
Motor Model	57 type stepper motor
Optional voltage	Match according to self provided drive
Product weight	1.8Kg
Purpose:	Suitable for OEM equipment matching, used for installation on equipment or instrument panels There are also black pump heads with strong corrosion resistance and high strength available for selection