1 DTIntroduction to desulfurization pump
DTThe series desulfurization pump is a new, efficient, single-stage single suction horizontal centrifugal pump developed by our company with the introduction of * * * technology and combined with the actual situation of the domestic desulfurization industry.
Main advantages: Wide applicability
Long sealing life
Wear resistant, corrosion-resistant, and non clogging
Applicable industries: flue gas desulfurization (limestone/gypsum wet desulfurization, double alkali desulfurization, circulating fluidized bed desulfurization, seawater desulfurization, ammonia desulfurization, etc.)
Applicable temperature:-20℃~+150℃
Applicable medium: solid content ≤40%Any concentration of acid, alkali, salt, especially lime slurry, mud liquid, coal slag liquid, slag liquid, waste acid, sewage, etc. (particle hardness and softness are not limited).
Performance parameters: caliberDN25-DN500mm
Traffic volume1.6m3/h-3000m3/h
Head lift5m-125m
Material of overcurrent components: duplex stainless steel
Mechanical seal material: pressureless sintered silicon carbide.
II DTMeaning of desulfurization pump model
III DTSchematic diagram of desulfurization pump structure
4、 Application scope of DT desulfurization pump
This series of desulfurization pumps is widely used in industries such as power, metallurgy, coal, building materials, and chemical engineering. It is mainly used to transport slurry with strong abrasive and corrosive properties containing solid particles, such as processing concentrate tailings in power plants, removing ash and slag in power plants, transporting coal slurry and heavy medium coal preparation in coal preparation plants, and transporting slurry in coastal and river mining operations. The maximum weight concentration it can handle is: 45% mortar, 60% slurry, with a chloride ion content of up to 60000ppm in the slurry. The pH value of the slurry is allowed to be between 4-13, the slurry temperature is ≤ 65 ° C, and the slurry weight concentration Cw * * can reach up to 60%.
5、 Schematic diagram of DT pump structure
6、 Performance parameter table of DT desulfurization pump
model Type |
rotational speed Speed n |
internet traffic Capacity Q |
lift Head H |
shaft power Power of shaft Pa |
efficiency η |
Must have cavitation allowance (NPSH)r |
electrical machinery |
Power/Voltage Power/Voltage | |||||||
r/min | m3/h | m | KW | % | m | KW/V | |
800DT-A90 | 590 | 6200 | 28.7 | 553.2 | 87.6 | 2.7 | 710/6000 |
8800 | 26.1 | 700.4 | 89.3 | 3.5 | 900/6000 | ||
9700 | 23.5 | 715.2 | 86.8 | 3.9 | 900/6000 | ||
490 | 5170 | 20.0 | 321.5 | 87.6 | 2.0 | 400/6000 | |
7338 | 18.1 | 405.0 | 89.3 | 2.5 | 500/6000 | ||
8089 | 16.3 | 413.7 | 86.8 | 2.9 | 560/6000 | ||
700DT-A84 | 590 | 4250 | 24.5 | 326.3 | 86.9 | 2.8 | 500/6000 |
6300 | 22.3 | 430.9 | 88.8 | 3.5 | 560/6000 | ||
7360 | 20.1 | 467.4 | 86.2 | 4.0 | 630/6000 | ||
490 | 3545 | 17.0 | 188.9 | 86.9 | 2.0 | 250/6000 | |
5255 | 15.5 | 250.0 | 88.8 | 2.6 | 315/6000 | ||
6140 | 14.0 | 271.6 | 86.2 | 3.0 | 355/6000 | ||
600DT-A82 | 590 | 3300 | 27.8 | 343.2 | 72.8 | 3.0 | 500/6000 |
4700 | 24.7 | 358.0 | 88.3 | 3.7 | 500/6000 | ||
5300 | 21.7 | 362.9 | 86.3 | 4.0 | 500/6000 | ||
5600 | 20.4 | 368.2 | 84.5 | 4.0 | 500/6000 | ||
490 | 2718 | 18.9 | 192.2 | 72.8 | 2.2 | 280/6000 | |
3871 | 16.8 | 200.6 | 88.3 | 2.8 | 280/6000 | ||
4368 | 14.7 | 202.5 | 86.3 | 3.0 | 280/6000 | ||
4612 | 13.8 | 205.1 | 84.5 | 3.0 | 280/6000 | ||
500DT-A85 | 590 | 2040 | 26.8 | 204.5 | 72.8 | 4.1 | 250/6000 |
3400 | 24.4 | 266.7 | 84.7 | 355/6000 | |||
4080 | 22.4 | 305.2 | 80.1 | 400/6000 | |||
490 | 1702 | 18.6 | 118.4 | 72.8 | 3.1 | 220/6000 | |
2836 | 17.0 | 155.0 | 84.7 | 220/6000 | |||
3403 | 15.3 | 177.0 | 80.1 | 220/6000 | |||
350DT-A78 | 740 | 1332 | 51.1 | 289.6 | 64.0 | 6.5 | 355/6000 |
2430 | 44.5 | 377.7 | 78.0 | 500/6000 | |||
2865 | 39.6 | 408.7 | 75.6 | 500/6000 | |||
590 | 1062 | 32.5 | 146.9 | 64.0 | 3.5 | 185/6000 | |
1938 | 28.3 | 191.5 | 78.0 | 250/6000 | |||
2284 | 25.2 | 207.3 | 75.6 | 280/6000 | |||
300DT-A60 | 980 | 1170 | 63.1 | 235.6 | 71.8 | 8.4 | 315/6000 |
1779 | 47.1 | 281.4 | 81.1 | 355/6000 | |||
2403 | 36.1 | 313.3 | 75.4 | 400/6000 | |||
740 | 878 | 29.9 | 99.6 | 71.8 | 4.3 | 132/380 | |
1335 | 26.5 | 118.8 | 81.1 | 160/380 | |||
1803 | 20.3 | 132.2 | 75.4 | 160/380 | |||
200DT-45B | 990 | 279 | 31.0 | 37.4 | 62.9 | 3.3 | 55/380 |
557 | 26.1 | 49.0 | 80.8 | 75/380 | |||
645 | 23.3 | 52.6 | 77.8 | 75/380 | |||
730 | 206 | 16.9 | 15.1 | 62.9 | 2.0 | 22/380 | |
410 | 14.2 | 19.6 | 80.8 | 30/380 | |||
475 | 12.7 | 21.1 | 77.8 | 30/380 | |||
150DT-55B | 990 | 280 | 53.7 | 64.8 | 63.2 | 3.7 | 90/380 |
517 | 48.0 | 88.3 | 76.5 | 110/380 | |||
630 | 45.9 | 100.8 | 78.1 | 132/380 | |||
740 | 209 | 30.0 | 27.0 | 63.2 | 2.3 | 37/380 | |
387 | 26.8 | 36.9 | 76.5 | 55/380 | |||
471 | 25.7 | 42.2 | 78.1 | 55/380 | |||
150DT-50 | 980 | 123 | 44.6 | 27.6 | 54.1 | 3.5 | 37/380 |
221 | 40.1 | 36.9 | 65.4 | 55/380 | |||
279 | 37.2 | 43.4 | 65.2 | 55/380 | |||
740 | 92 | 24.7 | 11.4 | 54.1 | 2.1 | 18.5/380 | |
165 | 22.3 | 15.3 | 65.4 | 22/380 | |||
208 | 20.6 | 17.9 | 65.2 | 30/380 | |||
150DT-40 | 1480 | 260 | 61.2 | 68.8 | 63.0 | 6.5 | 90/380 |
440 | 53.8 | 88.2 | 73.1 | 110/380 | |||
503 | 50.7 | 95.4 | 72.8 | 132/380 | |||
980 | 171 | 26.5 | 19.6 | 63.0 | 2.6 | 30/380 | |
289 | 23.3 | 25.1 | 73.1 | 37/380 | |||
331 | 21.9 | 27.1 | 72.8 | 37/380 | |||
100DT-45 | 1480 | 88 | 76.4 | 43.6 | 42.0 | 6.0 | 55/380 |
166 | 65.2 | 56.9 | 51.8 | 75/380 | |||
219 | 54.3 | 66.5 | 48.7 | 90/380 | |||
970 | 57 | 32.8 | 12.1 | 42.0 | 2.4 | 18.5/380 | |
109 | 28.0 | 16.0 | 51.8 | 22/380 | |||
144 | 23.3 | 18.8 | 48.7 | 30/380 | |||
100DT-40B | 1480 | 129 | 61.0 | 37.7 | 56.9 | 3.5 | 55/380 |
219 | 56.1 | 48.7 | 68.7 | 75/380 | |||
268 | 53.6 | 55.6 | 70.4 | 75/380 | |||
970 | 85 | 26.2 | 10.7 | 56.9 | 1.7 | 15/380 | |
144 | 24.1 | 13.8 | 68.7 | 22/380 | |||
176 | 23.0 | 15.7 | 70.4 | 22/380 | |||
100DT-35 | 1480 | 163 | 45.9 | 33.5 | 60.9 | 4.1 | 45/380 |
278 | 41.5 | 43.7 | 71.9 | 55/380 | |||
323 | 39.2 | 47.1 | 73.2 | 75/380 | |||
970 | 107 | 19.7 | 9.4 | 60.9 | 1.9 | 15/380 | |
182 | 17.8 | 12.3 | 71.9 | 18.5/380 | |||
212 | 16.8 | 13.3 | 73.2 | 18.5/380 | |||
80DT-36 | 1480 | 86 | 47.1 | 23.3 | 47.4 | 3.2 | 30/380 |
151 | 42.0 | 28.5 | 60.7 | 37/380 | |||
167 | 39.9 | 29.3 | 62.0 | 37/380 | |||
970 | 56 | 20.2 | 6.5 | 47.4 | 1.5 | 11/380 | |
99 | 18.0 | 8.0 | 60.7 | 15/380 | |||
109 | 17.1 | 8.2 | 62.0 | 15/380 | |||
65DT-40 | 1480 | 71 | 63.2 | 26.2 | 46.7 | 4.5 | 37/380 |
141 | 57.5 | 35.6 | 62.1 | 45/380 | |||
159 | 54.6 | 36.1 | 62.1 | 55/380 | |||
970 | 47 | 27.1 | 7.4 | 46.7 | 2.1 | 11/380 | |
92 | 24.7 | 10.0 | 62.1 | 15/380 | |||
104 | 23.5 | 10.7 | 62.1 | 15/380 | |||
65DT-30 | 1480 | 44 | 35.6 | 9.1 | 46.7 | 4.6 | 15/380 |
79 | 32.6 | 12.8 | 54.6 | 18.5/380 | |||
99 | 30.7 | 15.4 | 53.8 | 22/380 | |||
960 | 29 | 15.2 | 2.6 | 46.7 | 2.2 | 5.5/380 | |
51 | 13.9 | 3.5 | 54.6 | 5.5/380 | |||
64 | 13.1 | 4.2 | 53.8 | 7.5/380 |