VIP member
DYBTL501 piezoelectric accelerometer should
DYBTL501 piezoelectric accelerometer should
Product details
Basic parameters
Material Science: |
mixture |
|---|---|
Place of Origin: |
Shanghai |
Product certification: |
ISO9001-2000 |
Output signal: |
Simulated type |
Linearity: |
1%F.S. |
Execution standards: |
national standard |
Production process: |
film |
Repeatability: |
1%F.S. |
Physical properties of materials: |
conductor |
Material crystal structure: |
Amorphous |
Delay: |
1%F.S. |
Brand: |
Chuan Shuo |
model: |
DYBTJ |
Detailed explanation of product selection based on working conditions. Contact the company's technical department at 181 4977 8686
summary:
DYBTL501 piezoelectric accelerometer is applied to the absolute (relative to free surface) vibration of key rotating machinery that requires measurement of shell acceleration, such as displacement, velocity, acceleration, etc. It is more suitable for monitoring the damage of bearings or gearboxes. The sensor adopts the most advanced integrated circuit technology (VLSI) and ICP type enhanced anti-interference design, which makes the sensor highly integrated and greatly improves stability, reliability, and other aspects; Using crystal circuits with no moving parts, there will be no wear or degradation. It has a long service life and can be installed vertically, horizontally, or at any angle.
The circuit is completely isolated from the casing, avoiding the noise problem caused by multiple grounding points that often occur on site.
The wide frequency band design enables the DYBTL501 piezoelectric accelerometer to cover almost all the rotational speeds and higher harmonics of rotating machinery within its frequency range. High performance makes it applicable to all rotating mechanical equipment in harsh industrial environments.
Technical parameters:
Electrical environment
1. Sensitivity: 10.2mV/m/s (100mV/g) ± 5% (25 ℃, 80Hz) 1. Operating temperature: -40℃～120℃
2. Acceleration range: 50g 2. Humidity: ≤ 100% No condensation, no immersion in water
3. Amplitude linearity: ± 1% FS 3. Protection level: IP67
4. Response frequency: 2.0-10KHz (± 3.0 dB) 4. Impact limit: 5000g peak
5. Resonance frequency: 26KHz Physical
6. Lateral sensitivity: 5% 1. Weight: 100g
7. Transmission distance: up to 305 meters 2. Shell material: stainless steel
8. DC bias voltage: 12V 3. Output connector: MIL-C-5015， 2 needles (A, B end)
9. Power supply voltage: 18-30Vdc 4, pin A: signal
10. Power constant current: 2-10mA 5, pin B: common terminal
11. Electronic noise: 10 μ V rms (2Hz-20KHz) 6. Installation aperture: see selection
12. Output impedance:<100 Ω 7, installation torque: 3N * m
13. Grounding: shell insulation, internal shielding 8, diameter: 1 inch (25.4mm)
9. Attachment: Cable, Installation Conversion Base, Installation Bolt
Ordering information:
Main component 1: Probe
Order number description
The output connector of DYBTL501 sensor is a 2-pin MIL socket
Note: The required options for sensors include: [Main component 1: Probe, Attachment 1: Connecting cable, Attachment 2: Installing conversion base, and Attachment 3: Installing bolts].
Attachment 1: Connecting Cables
Order number Cable length A Other B Description
DYBTL501901-Ax-Bxx Scope:
1m≤A≤300m，
0.5m increments, default 3m.
For example:
A2.5=cable length of 2.5 meters. 00: No requirement for 2-pin MIL-C-5015 plug, with x meters of 2-core shielded twisted cable, diameter 4mm< 120 ℃.
DYBTL501801-Ax-Bxx 2-pin MIL-C-5015 plug with 2-meter 2-core shielded stranded wire armored cable, diameter 7mm< 150 ℃.
Attachment 2: Installation of Conversion Base (Standard)
Order number description
DYBTL501902 includes 1/4-28NFT to M8 × 1 mounting bolts
Attachment 3: Installation bolts
Order number description
DYBTL501103 M6×1
DYBTL501203 M8×1
DYBTL501303 M10×1
DYBTL501403 M10 × 1.5 (default)
DYBYL501503 1/4-28UNF
DYBTL501 piezoelectric accelerometer is applied to the absolute (relative to free surface) vibration of key rotating machinery that requires measurement of shell acceleration, such as displacement, velocity, acceleration, etc. It is more suitable for monitoring the damage of bearings or gearboxes. The sensor adopts the most advanced integrated circuit technology (VLSI) and ICP type enhanced anti-interference design, which makes the sensor highly integrated and greatly improves stability, reliability, and other aspects; Using crystal circuits with no moving parts, there will be no wear or degradation. It has a long service life and can be installed vertically, horizontally, or at any angle.
The circuit is completely isolated from the casing, avoiding the noise problem caused by multiple grounding points that often occur on site.
The wide frequency band design enables the DYBTL501 piezoelectric accelerometer to cover almost all the rotational speeds and higher harmonics of rotating machinery within its frequency range. High performance makes it applicable to all rotating mechanical equipment in harsh industrial environments.
Technical parameters:
Electrical environment
1. Sensitivity: 10.2mV/m/s (100mV/g) ± 5% (25 ℃, 80Hz) 1. Operating temperature: -40℃～120℃
2. Acceleration range: 50g 2. Humidity: ≤ 100% No condensation, no immersion in water
3. Amplitude linearity: ± 1% FS 3. Protection level: IP67
4. Response frequency: 2.0-10KHz (± 3.0 dB) 4. Impact limit: 5000g peak
5. Resonance frequency: 26KHz Physical
6. Lateral sensitivity: 5% 1. Weight: 100g
7. Transmission distance: up to 305 meters 2. Shell material: stainless steel
8. DC bias voltage: 12V 3. Output connector: MIL-C-5015， 2 needles (A, B end)
9. Power supply voltage: 18-30Vdc 4, pin A: signal
10. Power constant current: 2-10mA 5, pin B: common terminal
11. Electronic noise: 10 μ V rms (2Hz-20KHz) 6. Installation aperture: see selection
12. Output impedance:<100 Ω 7, installation torque: 3N * m
13. Grounding: shell insulation, internal shielding 8, diameter: 1 inch (25.4mm)
9. Attachment: Cable, Installation Conversion Base, Installation Bolt
Ordering information:
Main component 1: Probe
Order number description
The output connector of DYBTL501 sensor is a 2-pin MIL socket
Note: The required options for sensors include: [Main component 1: Probe, Attachment 1: Connecting cable, Attachment 2: Installing conversion base, and Attachment 3: Installing bolts].
Attachment 1: Connecting Cables
Order number Cable length A Other B Description
DYBTL501901-Ax-Bxx Scope:
1m≤A≤300m，
0.5m increments, default 3m.
For example:
A2.5=cable length of 2.5 meters. 00: No requirement for 2-pin MIL-C-5015 plug, with x meters of 2-core shielded twisted cable, diameter 4mm< 120 ℃.
DYBTL501801-Ax-Bxx 2-pin MIL-C-5015 plug with 2-meter 2-core shielded stranded wire armored cable, diameter 7mm< 150 ℃.
DYBTL501701-Ax-Bxx 2-pin MIL-C-5015 plug (right angle) with 2-meter 2-core shielded stranded wire armored cable, diameter 7mm< 150 ℃.
DYBT501601-Ax-Bxx 2-pin MIL-C-5015 sealed plug with 2-meter 2-core shielded twisted cable, diameter 4mm< 120 ℃.
Attachment 2: Installation of Conversion Base (Standard)
Order number description
DYBTL501902 includes 1/4-28NFT to M8 × 1 mounting bolts
Attachment 3: Installation bolts
Order number description
DYBTL501103 M6×1
DYBTL501203 M8×1
DYBTL501303 M10×1
DYBTL501403 M10 × 1.5 (default)
DYBYL501503 1/4-28UNF
Note: Installation bolt length: 9mm
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-