Production preheating oven, curing oven, stress relief oven, aging test oven, tunnel oven, melt glue and paint oven, high temperature 400 ° C, 500 ° C, 600 ° C oven, windless natural convection oven, silicone rubber secondary vulcanization oven, level 100/1000Class/10000 dust-free oven, single door oven, two door oven (divided into single control and independent control), four door oven (divided into single control and independent control), PCB oven, anti magnetic and anti radiation oven, anti oxidation oven, explosion-proof oven, high temperature oven, vacuum box, constant temperature and humidity testing machine, cold and hot shock testing machinePCT high-voltage acceleration testing machine, UV ultraviolet aging testing machine, xenon lamp aging testing machine, etc. For non-standard customization, contact person:Miss Xie, please call to inquire about specific requirements.

A. Widely used:

Oven/OvenSuitable for baking items with chemical gases, stress removal, curing, drying of paint films, secondary vulcanization, preheating, aging, etc. Widely used in high-temperature baking, high-temperature stress relief, aging, drying, shaping, processing, heat treatment, etc. for electronics, motors, communications, electroplating, plastics, rubber, hardware, chemicals, printing, spraying, glass, ceramics, etc.

B. Machine performance:

This machine is a high-performance, high reliability oven with well-designed structure, material, strength, insulation, and air circulation. It also has a beautiful appearance and easy operation. Hot air circulation system, the air source is driven by a circulation motor to drive the wind wheel through an electric heater, and the hot air is sent to the inside of the oven through the air duct. After use, the air is sucked into the air duct to become the air source for further circulation and heating, which saves energy and has good temperature uniformity. When the door opens or closes and causes disturbance, the air supply circulation system can quickly restore the operating temperature value.

Product Features (Non standard Customization)

1. The inner material is SUS mirror stainless steel with low thermal deformation, and the outer material is SECC steel plate treated with electrostatic powder coating and baking paint, which is beautiful and elegant.

2. Insulation material: high-density fiber cotton, with good insulation properties, ensuring maximum temperature insulation.

3. The tight material for anti sealing is high-temperature resistant silicone or woven rock cotton strips, which can withstand high temperatures for a long time without deformation or cracking

4. Heating material: It is a honeycomb type corrosion-resistant and acid alkali resistant stainless steel heater, which is pollution-free, dust-free, and has a long service life

5. The temperature control is an intelligent temperature control meter with PID microcomputer automatic calculation, and PV/SV are displayed simultaneously.

6. Temperature sensing input CA (K) TYPE temperature sensing head, output 12V

7. Timer: Electronic digital display from 0 to 9999 (switchable by S.M.H), temperature up timer, power off when time is up, alarm sound and light warning, ensuring accurate working time.

8. Built in forced air circulation

9. High temperature resistant long shaft motor, turbofan.

10. The current controller adopts a thyristor solid-state relay (SSR) with no contact or spark phenomenon, which is safe and maintains high stability of the current. The output ratio is automatically adjusted through the temperature controller signal.

11. Ultra high temperature protection: When the temperature inside the box rises abnormally, the power supply of the whole machine will be automatically cut off.

12. Motor overheating protection: prevents motor damage caused by overheating.

13. Phase sequence protection: prevents power loss and phase sequence errors, ensuring the safety of the motor.

The standard specifications for ovens/ovens are as follows (non-standard customization)

No. 18 Hezhou Road, Yanggongzhou

The above prices are for reference only. Please refer to the actual customized parameters