XS-J600Determination of flash water content in liquid hydrocarbons using a vapor sampler

Liquid hydrocarbon flash vaporization sampling injector:

The analysis of trace water in liquid hydrocarbons has always been a technical challenge in production. The original method was to vaporize gas through a constant temperature water body connected to a capillary tube in a steel cylinder, which was a cumbersome procedure. Our company has independently developed a liquid hydrocarbon flash evaporation sampling injector for this product. This product uses the principle of flash evaporation to vaporize liquid hydrocarbon components, controlled by a microcontroller, and accurately controlled by a flow meter to make the pre-treatment operation of liquid hydrocarbon samples simple and the measurement accurate. Received recognition from a large number of users. However, sampling liquid hydrocarbons is relatively difficult,XS-J600Determination of flash water content in liquid hydrocarbons using a vapor samplerSolve the problem of sample injection.

Scope of application of liquid hydrocarbon flash vaporization sampling injector:

XS-J600The instrument is mainly used for sample pretreatment before analyzing liquid hydrocarbon substances, converting liquid samples into gaseous hydrocarbons with constant temperature, constant pressure, and controllable flow rate for easy detection. The samples used for instrument testing include:

• Determination of trace dimers in industrial butadiene
• Determination of Purity and Hydrocarbon Impurities of Industrial Butadiene
• Analysis of Trace Carbon Monoxide and Carbon Dioxide in Various Industrial Olefins, Used in conjunction with Gas Chromatography
• Liquid hydrocarbon composition analysis, used in conjunction with gas chromatography
• Analysis of Trace Sulfur and Oxygen in Industrial Ethylene and Propylene, Used in conjunction with Gas Chromatography
• Analysis of chlorine in industrial ethylene and propylene, used in conjunction with gas chromatography
• Analysis of trace moisture in isomers of ethylene, propylene, and butene using a trace moisture analyzer
• Used for the analysis of trace moisture in gases such as nitrogen, hydrogen, air, etc., in conjunction with a trace moisture analyzer

XS-J600Performance characteristics:

• Fast, accurate, and reliable
• Easy to use, lightweight structure
• Gas inlet and outlet card sleeve connection, easy to operate
• Automatic temperature control
• Display set temperature and measured temperature
• Quick and agile response speed, reaching the set value in a short time
• The temperature control meter can be set arbitrarily within the range of 0~230 ℃ and is adjustable
• Temperature control accuracy: ± 0.1

The company solemnly promises that all instrument products are covered by a one-year warranty and maintenance.

®Shanghai Xuansheng Science