VIP member
Double cone rotary vacuum batch dryer
Product Overview: Related Engineering
Product details
SZGSeries Double Cone Rotary Vacuum Drying Machine
Equipment features:
SZGThe series of double cone rotary vacuum dryers is a new type of dryer that integrates mixing and drying. Combine the condenser, vacuum pump, and drying equipment to form a vacuum drying device. If solvent recovery is not required, the condenser can be omitted. This machine is designed with a simple internal structure, easy cleaning, and all materials can be discharged, making it easy to operate. Can reduce labor intensity and improve working environment. At the same time, due to the rotation of the container itself, the material also rotates, but there is no material accumulation on the wall, resulting in a high heat transfer coefficient and a high drying rate. This not only saves energy, but also ensures uniform and sufficient drying of the material, resulting in good quality. It can be widely used for drying in industries such as pharmaceuticals, chemicals, food, dyes, etc.
working principle:
SZGThe series of double cone rotary vacuum dryers is a double cone rotary tank body. In a vacuum state, the tank body is heated by introducing heat transfer oil or hot water into the jacket, and the heat contacts the wet material through the inner wall of the tank body. The water vapor or other gases evaporated from wet materials after absorbing heat are extracted through a vacuum pump and a vacuum exhaust pipe. Due to the vacuum state inside the tank and the continuous up and down, internal and external flipping of the material caused by the rotation of the tank, the drying speed of the material is accelerated, and the drying rate is increased to achieve uniform drying.
Application scope:
This machine is suitable for vacuum drying and mixing of powder and granular materials in industries such as medicine, food, and chemical engineering, especially suitable for drying required by the following:
1Cannot accept high temperature thermosensitive materials
2Materials that require solvent recycling
3Easy to oxidize, flammable and explosive materials
4Materials with requirements for crystalline morphology
5Require materials with low residual volatile content
Technical parameter table:
|
specifications |
100 |
350 |
500 |
750 |
1000 |
1500 |
2000 |
3500 |
4500 |
5000 |
|
name |
||||||||||
|
Tank capacity |
100 |
350 |
500 |
750 |
1000 |
1500 |
2000 |
3500 |
4500 |
5000 |
|
Loading capacity (L) |
≤50 |
≤175 |
≤250 |
≤375 |
≤500 |
≤750 |
≤1000 |
≤1750 |
≤2250 |
≤2500 |
|
Heating area (m2) |
1.16 |
2 |
2.63 |
3.5 |
4.61 |
5.58 |
7.5 |
11.2 |
13.1 |
14.1 |
|
Rotational speed (rpm) |
4-6 |
|||||||||
|
Motor power (kw) |
0.75 |
1.1 |
1.5 |
2 |
3 |
3 |
4 |
5.5 |
7.5 |
11 |
|
Floor Area Length x Width (mm) |
2160×800 |
2260×800 |
2350×800 |
2560×1000 |
2860×1300 |
3060×1300 |
3260×1400 |
3760×1800 |
3960×2000 |
4400×2500 |
|
Rotation height (mm) |
1750 |
2100 |
2250 |
2490 |
2800 |
2940 |
2990 |
3490 |
4100 |
4200 |
|
Design pressure inside the tank (MPa) |
-0.1-0.15 |
|||||||||
|
Design pressure of jacket (MPa) |
≤0.3 |
|||||||||
|
Working temperature (oC) |
Can interior ≤ 85, jacket ≤ 140 |
|||||||||
|
When using a condenser, a vacuum pump, |
2X-15A |
2X-15A |
2X-30A |
2X-30A |
2X-70A |
JZJX300-8 |
JZJX300-4 |
JZJX600-8 |
JZJX600-4 |
JZJX300-4 |
|
Model, power |
2KW |
2KW |
3KW |
3KW |
505KW |
7KW |
9.5KW |
11KW |
20.5KW |
22KW |
|
When not using a condenser, a vacuum pump, |
SK-0.4 |
SK-0.8 |
SK-0.8 |
SK-2.7B |
SK-2.7B |
SK-3 |
SK-6 |
SK-6 |
SK-9 |
SK-10 |
|
Model, power |
1.5KW |
2.2KW |
2.2KW |
4KW |
4KW |
5.5KW |
11KW |
11KW |
15KW |
18.5KW |
|
Weight (kg) |
800 |
1100 |
1200 |
1500 |
2800 |
3300 |
3600 |
6400 |
7500 |
8600 |
Note: For materials with significant volume changes before and after drying, the loading coefficient can be appropriately increased or decreased.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-