The equipment can meet the production needs of dry powder mortar, dry powder materials, dry powder adhesives, etc. with different performance requirements, such as putty powder, dry powder coatings, masonry mortar, plastering mortar, insulation system required mortar, decorative mortar, and various dry powder mortars; And it has many advantages such as small footprint, low investment, fast results, and simple operation. The dry mixed dry powder mortar mixer consists of a mixing bucket, transmission shaft, motor, mixing blades, flying knife device, feeding port, discharging port, observation door, sampler, safety detection switch, overflow device, etc. The purpose and task of these devices is to mix all materials evenly.

working principle:

When the machine is working and mixing, the materials inside the machine are subjected to the combined motion of two rotors in opposite directions. The blades with animal materials rotate counterclockwise along the inner wall of the machine slot, while the blades with animal materials flip left and right. In the weight loss zone where the two rotors intersect and overlap, regardless of the shape, size, and density of the materials, they can float up in an instant weight loss state. This causes the materials to form a continuous cycle of flipping in all directions inside the machine slot, intersecting and shearing each other, thus achieving a fast, soft, and uniform mixing effect

Structural features:

1. This machine is a horizontal cylinder with a unique structure of inner and outer double-layer spiral belts. It runs smoothly, has reliable quality, low noise, long service life, easy installation and maintenance, and has multiple agitator structures. It is a versatile mixing equipment with a wide range of applications.

2. The mixing speed is fast, the mixing uniformity is high, especially for viscosity. A scraper can be installed on the spiral belt, which is more suitable for thick and paste like mixing.

3. Under the mixing requirements of different materials (special materials must be cleaned after each mixing), different spiral belt structures and heating and drying jacket types are used.

4. Special atomized liquid, equipped with special nozzles.