800mm * 600mm dual position dual color countdown timer

Brand: YEQIN

texture of material: PC

Model: DJS86-3TA-YQ-22

Specification: 800mm * 600mm

Technical Parameter

☆ Multiple sealing, waterproof

☆ Complies with GB/14887-2011 and relevant international standards

☆ Red light: LED single brightness: 4360-5250, wavelength: 620-625nm, left and right up and down viewing angles: 30 °, power: ≤ 20W.

☆ Green light: LED single brightness: 8667-10400, wavelength: 503-506nm, left and right up and down viewing angles: 30 °, power: ≤ 20W.

☆ Environmental temperature:- 40℃~+80℃

☆ Working voltage: AC220V

☆ Material of lightbox shell: PC

☆ IP rating: IP53

Visual distance ≥ 500m

Design requirements for traffic indicator lights:

1. Standard: Complies with GB14887-2003 standard.

2. Appearance design: The appearance is specially designed for LED light sources, with an ultra-thin and user-friendly structure, beautiful appearance, fine craftsmanship, and easy installation in various combinations.

3. Transparent design: The outer surface of the transparent lens adopts an inclined surface design, which is not easy to accumulate dust. Countdown signal light

4. Shell material: the shell is made of die cast aluminum or polycarbonate (PC) materials and silicone rubber seals, which are dust-proof, waterproof, flame retardant, anti-aging and have a long service life.

5. Light source: The light source uses imported four element ultra-high brightness light-emitting diodes (LEDs) with strong brightness, making it easy for people to identify. And it has a long lifespan and good energy-saving effect.

Function and Features:

The lens color chip adopts a unique spider mesh secondary light distribution design to ensure even illumination of the signal light.

The light transmittance is high, and the light spot meets the chromaticity standard. The circuit design adopts a mesh design to make the signal light emit uniformly.

The light source adopts high brightness LED.

Customizable dimming function.

The lifespan of the entire lamp exceeds ten years, with resistance to vibration and wind pressure exceeding 145km/h.

Double sealed, shell protection level: 1P55.

The product has been tested by the Traffic Safety Product Quality Supervision and Testing Center of the Ministry of Public Security and meets the requirements of the People's Republic of China

Requirements for national road traffic signal lights GB14887-2011.

The product has passed CE, TUV, and EN2368 certifications.

Using highly reliable and high-power chips,

Double layer lens light distribution design

The product has been tested by the Traffic Safety Product Quality Supervision Center of the Ministry of Public Security and meets the requirements of GB14887-2011 of the People's Republic of China

The pedestrian signal light with a countdown timer is a countdown pedestrian signal light developed by our company using ultra bright LED light-emitting diodes. The whole lamp is connected to two others. It consists of an upper red pedestrian light and a lower green pedestrian light, with two built-in countdown lighting units.

characteristic:

Uniform brightness, chromatographic standards, low power consumption, long service life, and accurate countdown to inform pedestrians of passage and release time.

A pedestrian signal with a countdown timer is a type of traffic signal with a stopwatch, whose surface changes with the traffic light and can indicate the remaining time for pedestrians to cross the road. Traffic light

The pedestrian signal with a countdown timer is matched with the lane signal and controlled by the same signal. Due to road widening, pedestrians can refer to the countdown number when crossing the road to prevent traffic hazards caused by congestion. This signal light is equipped with a stopwatch, which changes with the traffic light on the surface to indicate the remaining traffic time.

☆ Compliant with GB14887-2011 Chinese National Standard Product Certification

☆ Imported high-efficiency LED signal lights with low power consumption and long lifespan

☆ Transparent PC face mask, high transmittance, flame retardant, and UV resistant

☆ Match all domestic signal control manufacturers' signal equipment access

☆ A bid control plan with technical advantages that meets the bidding requirements

☆ We can design the plan according to your requirements